MedSafe
VarunAPatil·MedSafe·PCB_Files/watch.kicad_pcb
About the MedSafe PCB
MedSafe is an open source RP2040/RP2350 PCB design by VarunAPatil, published on GitHub. It is a 4-layer board measuring 41 × 41 mm, with 113 components from 60 distinct parts.
Its main chip is the ESP32-PICO-D4, from the RP2040/RP2350 family. Other key parts include the APS6404L-3SQRx-ZR, CP2102N-Axx-xQFN28, MAX30105EFD_T, W25Q128JVS and BMP388. By type, the board carries 38 capacitors, 37 resistors, 12 ICs, 8 diodes, 5 transistors and 4 connectors.
It belongs with the wearables, power & battery and sensors designs in this gallery.
From the project
MedSafe is a custom-designed smartwatch platform engineered for real-time health and environmental monitoring. The project spans the full hardware–firmware stack — from KiCad schematics and custom PCB footprints all the way to a modular, multi-sensor ESP-IDF firmware that runs a
MedSafe is a custom-designed smartwatch platform engineered for real-time health and environmental monitoring. The project spans the full hardware–firmware stack — from KiCad schematics and custom PCB footprints all the way to a modular, multi-sensor ESP-IDF firmware that runs a synchronized 50 Hz acquisition loop across four independent sensors.
The goal: a compact, wrist-worn device that simultaneously tracks heart rate & SpO₂, motion & orientation, altitude & atmospheric pressure, and GNSS location — all in one tightly integrated system.

Main components on the MedSafe
MedSafe bill of materials (BOM)
113 components, 60 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APS6404L-3SQRx-ZR | Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U1 |
| 1 | ESP32-PICO-D4 | QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm | U2 |
| 1 | CP2102N-Axx-xQFN28 | QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm | U3 |
| 1 | MAX30105EFD_T | 14-OESIP | U7 |
| 1 | W25Q128JVS | SOIC-8_5.23x5.23mm_P1.27mm | U8 |
| 1 | BMP388 | PQFN50P200X200X80-10N | U9 |
| 1 | LSM6DS3 | LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U10 |
| 1 | MAX-M10S | ublox_MAX | U11 |
| 1 | MCP1700x-120xxMB | SOT-89-3 | U12 |
| 1 | DRV2605LDGS | VSSOP-10_3x3mm_P0.5mm | U13 |
| 1 | TLV75533PDBV | SOT-23-5 | U14 |
| 1 | BQ24074RGT | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U15 |
| 3 | BC847 | SOT-23 | Q1, Q2, Q8 |
| 2 | BSS138 | SOT-23 | Q4, Q5 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P1.00mm_Vertical | J1 |
| 1 | Conn_01x14_MountingPin | HRS_FH34SRJ-14S-0.5SH_50_ | J2 |
| 1 | Conn_01x02_Pin | D_0603_1608Metric | J3 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 2 | Antenna_Shield | XCVR_NN03-320 | AE1, AE2 |
| 2 | SW_Push | SW_Push_SPST_NO_Alps_SKRK | SW1, SW2 |
Show 40 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ECS-400-10-37B2-CKY-TR | ECX-1637B2_ECS | XTAL1 |
| 1 | FC-135R 32.7680KA-A3 | XTAL_KA-A3_EPS | XTAL2 |
| 1 | NC | C_0603_1608Metric | D1 |
| 4 | LED | LED_0603_1608Metric | D2, D4, D7, D8 |
| 1 | PESD0402-0402T | D_SOD-923 | D6 |
| 1 | SS14FL | SOD-123FL | D9 |
| 1 | SP0503BAHT | SOT-143 | D13 |
| 1 | FerriteBead | L_0603_1608Metric | FB1 |
| 1 | 2 nH | L_0603_1608Metric | L1 |
| 1 | 1.8 nH | L_0603_1608Metric | L2 |
| 14 | 0.1 uF | C_0603_1608Metric | C1, C8, C10, C11, C13, C14, C17, C22 +6 |
| 5 | 1 uF | C_0603_1608Metric | C2, C9, C24, C25, C32 |
| 1 | 100 pF | C_0603_1608Metric | C3 |
| 2 | 12.5pF | C_0603_1608Metric | C4, C7 |
| 1 | 8pF | C_0603_1608Metric | C5 |
| 1 | 10pF | C_0603_1608Metric | C6 |
| 1 | 0 F | C_0603_1608Metric | C12 |
| 2 | 22uF | C_0603_1608Metric | C15, C16 |
| 1 | 4.7 uF | C_0603_1608Metric | C18 |
| 2 | 10 uF | C_0603_1608Metric | C19, C21 |
| 3 | 1uF | C_0603_1608Metric | C23, C30, C31 |
| 1 | 47 pF | C_0603_1608Metric | C26 |
| 1 | 4.7uF | C_0603_1608Metric | C33 |
| 1 | 1.2 pF | C_0603_1608Metric | C35 |
| 1 | 1.5 pF | C_0603_1608Metric | C36 |
| 1 | 0.1uF | C_0603_1608Metric | C38 |
| 2 | 0R | R_0603_1608Metric | R1, R8 |
| 16 | 10k | R_0603_1608Metric | R2, R4, R5, R7, R11, R12, R22, R23 +8 |
| 2 | 5.1k | R_0603_1608Metric | R3, R33 |
| 1 | 0.3k | R_0603_1608Metric | R6 |
| 1 | 4.12k | R_0603_1608Metric | R9 |
| 1 | 1.18k | R_0603_1608Metric | R10 |
| 4 | 4.7k | R_0603_1608Metric | R18, R19, R20, R21 |
| 1 | 1.13k | R_0603_1608Metric | R24 |
| 2 | 1.5k | R_0603_1608Metric | R25, R42 |
| 3 | 33 | R_0603_1608Metric | R26, R27, R28 |
| 1 | 22.1k | R_0603_1608Metric | R34 |
| 1 | 47.5k | R_0603_1608Metric | R35 |
| 1 | 22 | R_0603_1608Metric | R36 |
| 1 | 1k | R_0603_1608Metric | R37 |
MedSafe design files
The KiCad project lives in the VarunAPatil/MedSafe repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB_Files/watch.kicad_pcb
- SchematicPCB_Files/watch.kicad_sch
MedSafe: common questions
What microcontroller does the MedSafe use?
The MedSafe is built around the ESP32-PICO-D4, from the RP2040/RP2350 family.
How big is the MedSafe PCB?
The MedSafe measures 41 × 41 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the MedSafe?
113 components, from 60 distinct parts. The full bill of materials is listed on this page.
Where can I download the MedSafe design files?
From the VarunAPatil/MedSafe repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the MedSafe design in my own project?
The repository has no license, so all rights stay with VarunAPatil. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MedSafe without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k