FlexLogic EVB
y-suyama·FlexLogic_EVB
About the FlexLogic EVB PCB
FlexLogic EVB is an open source RP2040/RP2350 PCB design by y-suyama, published on GitHub under the Apache-2.0 license. It is a 6-layer board measuring 100 × 100 mm, with 306 components from 70 distinct parts.
Its main chip is the RP2350_60QFN, from the RP2040/RP2350 family. Other key parts include the MT9700, SL2.1S, LCMXO2-1200HC-4SG32I, MTS4P and XT25F32FDTIGT. By type, the board carries 124 capacitors, 114 resistors, 27 ICs, 14 connectors, 10 inductors and 7 diodes.
Main components on the FlexLogic EVB
FlexLogic EVB bill of materials (BOM)
306 components, 70 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MT9700 | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | IC1 |
| 1 | SL2.1S SL2.1s | SSOP-16_L4.6-W2.6-P0.53-LS4.0-BL | IC2 |
| 1 | LCMXO2-1200HC-4SG32I | QFN50P500X500X60-33N_handsolder | IC4 |
| 1 | MTS4P | MTS4P | IC5 |
| 1 | XT25F32FDTIGT | SON50P300X200X60-9N_handsolder | IC6 |
| 1 | RT5752AHGJ5 | TSOT-23-5 | U1 |
| 1 | TLV803SDBZR | DBZ0003A_N | U2 |
| 3 | RQ12000160 | CRYSTAL-SMD_4P-L2.5-W2.0-BL | U3, U6, U10 |
| 2 | ADS1115IDGSR | DGS0010A_M | U4, U7 |
| 3 | TMUX1574DYYR | SOT-23-THIN-16_DYY_TEX | U5, U12, U17 |
| 1 | FT2232HL | LQFP-64_10x10mm_P0.5mm | U8 |
| 1 | 93LC56BT-I | 93LC56BT-I | U9 |
| 1 | RP2350_60QFN | QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U11 |
| 1 | ESP-12F | ESP-12E | U13 |
| 1 | MCP4725xxx-xCH | SOT-23-6 | U14 |
| 2 | CC6920SO-10A | SO-8_3.9x4.9mm_P1.27mm | U15, U16 |
| 4 | LMV321ATDTR | SOT-23-5 | U19, U20, U22, U23 |
| 1 | ADS1115IDGSR | DGS0010A_M | U21 |
| 3 | L2N7002SLLT1G | SOT-23_Handsoldering | Q1, Q2, Q4 |
| 1 | GT-USB-7010ASV | USB-C-SMD_G-SWITCH_GT-USB-7010ASV | J1 |
Show 50 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | WJ126V-5.0-2P | WJ126V-5.0-2P | J2, J3, J4, J5 |
| 5 | CONN_02X03_ODD_EVEN Conn_02x03_Odd_Even | PinHeader_2x03_P2.54mm_Vertical | J6, J7, J8, J9, J11 |
| 1 | 1.0-3PWB | 1.0-3PWB | J12 |
| 1 | PH-2A HB9500M-9.5-4P | CONN_HB9500-9.5-4P_KAN | J13 |
| 1 | TF-CARD_H1.8_SY | TF-CARD_H1.8_SY | J14 |
| 1 | HC-FPC-0.5-12P-CXH20 | HC-FPC-0.5-12P-CXH20 | J15 |
| 1 | SKRPACE010 | SW_SKRPACE010 | S1 |
| 1 | DSWB02LHGETB QS-301-AGS5P | QS-301-AGS5P | SW1 |
| 1 | DS-04R | DS-04R | SW3 |
| 2 | RH-5117 | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1, TP4 |
| 2 | RH-5001 | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2, TP5 |
| 1 | LESD5D5.0CT1G-ES LESD5D5-0CT1G | D_SOD-523 | D1 |
| 1 | XL-1005UBC | LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder | D2 |
| 3 | TT0401TBX | DFN-2L | D3, D4, D5 |
| 1 | XL-1005UBC TT0401TBX | DFN-2L | D6 |
| 1 | LESD5D5.0CT1G-ES TT0401TBX | DFN-2L | D7 |
| 8 | HCB1005KF-121T20 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | L1, L2, L4, L5, L6, L7, L8, L9 |
| 1 | FTC252012S1R5MBCA 1.5uH | FTC252012S1R5MBCA | L3 |
| 1 | 3.3uH | AOTA-B201610S3R3-101-T | L10 |
| 75 | GRM033R61E104KE14D 0.1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C6, C8, C9, C10, C11, C12, C13 +67 |
| 6 | HGC0402R5106M100NTEJ 10uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C7, C15, C16, C17, C68 |
| 4 | HGC0603R5226M100NTHJ 22uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C4, C5, C20 |
| 6 | TCC0201COG300J500ZT 30pF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C18, C19, C47, C48, C72, C73 |
| 2 | GRM033R61E104KE14D 0.01uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C24, C25 |
| 2 | 0201B103K250NT 0.01uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C32, C52 |
| 1 | TCC0402X5R105M6R3AT 1uF | C_0402_1005Metric | C33 |
| 8 | TCC0402X5R105M6R3AT 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C36, C49, C54, C66, C74, C85, C88, C91 |
| 3 | 0.01uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C79, C94, C107 |
| 11 | 0.1uF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C95, C96, C97, C98, C99, C100, C103, C104 +3 |
| 2 | 1uF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C101, C102 |
| 2 | 0402X475K100NT 4.7uF | C_0402_1005Metric_small_pads | C114, C115 |
| 2 | 0402X475K100NT 4.7uF | C_0402_1005Metric | C116, C117 |
| 4 | 10k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R1, R12, R23, R66 |
| 10 | 0201WMF4701TEE 4.7k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R2, R5, R13, R26, R27, R29, R36, R100 +2 |
| 26 | RC0201FR-0710KL 10k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R3, R24, R25, R48, R50, R51, R53, R55 +18 |
| 1 | RC-01W104JT 100k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R4 |
| 3 | RC0201FR-071KL 1k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R6, R87, R99 |
| 1 | WR02X362JAL 3.6k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R7 |
| 1 | 0201WMF2202TEE 22k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R8 |
| 13 | RC-01W30R0FT 30 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R9, R14, R15, R22, R32, R46, R47, R59 +5 |
| 2 | 0201WMF5101TEE 5.1k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R10, R11 |
| 8 | RC0201FR-071ML 1M | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R16, R21, R30, R34, R37, R41, R42, R45 |
| 7 | WR02X222JAL 2.2k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R17, R18, R28, R35, R49, R71, R93 |
| 16 | RC-01W241JT 240 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R19, R20, R31, R33, R38, R39, R40, R43 +8 |
| 1 | 0201WMF1202TEE 12k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R52 |
| 10 | 2.2k | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R54, R57, R76, R77, R78, R79, R80, R81 +2 |
| 2 | RC0201JR-07100RL 100 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R62, R70 |
| 1 | 0201WMF0000TEE 0 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R65 |
| 6 | 510 | R_0201_0603Metric_Pad0.64x0.40mm_HandSolder | R82, R83, R84, R85, R96, R97 |
| 2 | FRC0402J3R9TS 30 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R104, R106 |
FlexLogic EVB design files
The KiCad project lives in the y-suyama/FlexLogic_EVB repository on GitHub; these links point at the commit this page was built from.
- LayoutFlexLogic_EVB.kicad_pcb
- SchematicFlexLogic_EVB.kicad_sch
- BOMFlexLogic_EVB_BOM.csv
FlexLogic EVB: common questions
What microcontroller does the FlexLogic EVB use?
The FlexLogic EVB is built around the RP2350_60QFN, from the RP2040/RP2350 family.
How big is the FlexLogic EVB PCB?
The FlexLogic EVB measures 100 × 100 mm, has 6 copper layers and is 1.6196 mm thick.
How many components are on the FlexLogic EVB?
306 components, from 70 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FlexLogic EVB design files?
From the y-suyama/FlexLogic_EVB repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FlexLogic EVB design in my own project?
Yes, under the terms of its Apache-2.0 license, which y-suyama chose for the repository.
Can I test firmware for the FlexLogic EVB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k