10 open source boards using the TMUX1574DYYR
Real designs built with the TMUX1574DYYR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
MicroSD-Switcher-Reader
will127534
42.3 × 60.2 mm72 parts4LMIT25AVR/Arduino
BATDATUNIT01
mlab-modules
136.2 × 85.9 mm206 parts2LGPL-3.05RP2040/RP2350
FlexLogic EVB
y-suyama
100 × 100 mm306 parts6LApache-2.00RP2040/RP2350
FT2232H EVB
y-suyama
50 × 50 mm207 parts8LBSD-3-Clause0RP2040/RP2350
FlexLogicMini EVB
y-suyama
50 × 50 mm176 parts8LBSD-3-Clause0Caravel
pohantw
54.5 × 52.1 mm72 parts2LNo license0Caravel
efabless
54.5 × 52.1 mm72 parts2LNo license40Caravel
weyer7
54.5 × 52.1 mm72 parts2LNo license1Caravel
chipfoundry
54.5 × 52.1 mm72 parts2LNo license1Caravel
Rimal12345
54.5 × 52.1 mm72 parts2LNo license0
How designs wire the TMUX1574DYYR
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the TMUX1574DYYR connects to, and the resistors, capacitors and other passives placed on it.
- The *EN pin is tied to GND on 10 of 10 designs.
- The D1 pin has a pull-up to VDDIO on 6 of 10 designs, most often 10 kΩ.
- The D2 pin has a pull-up to VDDIO on 6 of 10 designs, most often 10 kΩ.
- The D3 pin has a pull-up to VDDIO on 6 of 10 designs, most often 10 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| SELpin 1 | Connected to: FT232H 50%, a connector 50%, TMUX1574DYYR 20% |
|
| S1Apin 2 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, a connector 20% |
|
| D1pin 4 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, FT2232HL 30% |
|
| S2Apin 5 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, a connector 20% |
|
| D2pin 7 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, FT2232HL 30% |
|
| GNDpin 8 | Connected to: GND 100% | — |
| D3pin 9 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, FT2232HL 30% |
|
| S3Apin 11 | Connected to: Caravel 50%, W25Q32JVSSIQ 50% |
|
| D4pin 12 | Connected to: Caravel 50%, W25Q32JVSSIQ 50%, FT2232HL 30% · not connected 20% |
|
| S4Bpin 13 | Connected to: A connector 60%, Caravel 50%, FT232H 50% · not connected 20% |
|
| S4Apin 14 | Connected to: Caravel 50%, W25Q32JVSSIQ 50% · not connected 30% |
|
| *ENpin 15 | Connected to: GND 100% | — |
| VDDpin 16 | Connected to: VDDIO 100% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Caravel pcb by efabless, MicroSD-Switcher-Reader by will127534, BATDATUNIT01 by mlab-modules and Caravel pcb by chipfoundry.
The TMUX1574DYYR in open source designs
The gallery holds 10 open source boards using the TMUX1574DYYR from 10 GitHub repositories; a typical one measures about 54.5 × 52.1 mm and carries around 72 components.
60% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Caravel pcb by efabless.
Parts used alongside the TMUX1574DYYR
Microcontrollers on boards using the TMUX1574DYYR
What boards using the TMUX1574DYYR are built for
TMUX1574DYYR: common questions
Where can I find a TMUX1574DYYR reference design?
Each of the 10 boards on this page is a real design using the TMUX1574DYYR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TMUX1574DYYR *EN pin connected?
The *EN pin is tied to GND on 10 of 10 designs. Counted from the KiCad layouts of 10 open source designs using the TMUX1574DYYR.
What pull-up resistor is used on the TMUX1574DYYR D1 pin?
The D1 pin has a pull-up to VDDIO on 6 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the TMUX1574DYYR.
What pull-up resistor is used on the TMUX1574DYYR D2 pin?
The D2 pin has a pull-up to VDDIO on 6 of 10 designs, most often 10 kΩ. Counted from the KiCad layouts of 10 open source designs using the TMUX1574DYYR.
What parts are used alongside the TMUX1574DYYR?
The 93C56, AZ1117CH-1.8TRG1, Caravel, FT232H and NCP1117LPST33T3G appear in the most repositories here.
Which microcontrollers do boards using the TMUX1574DYYR use?
Most are built on RP2040/RP2350 (3) and AVR/Arduino (1).
How big is a typical board using the TMUX1574DYYR?
The median is 54.5 × 52.1 mm, and 60% are two-layer designs.
What is the most popular open source board using the TMUX1574DYYR?
By GitHub stars, Caravel pcb by efabless, with 40 stars.
Can I simulate one of these boards using the TMUX1574DYYR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.