11 open source boards using the TLV803SDBZR

Real designs built with the TLV803SDBZR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the TLV803SDBZR

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the TLV803SDBZR connects to, and the resistors, capacitors and other passives placed on it.

  • The RESET_N pin has a capacitor to GND on 10 of 11 designs, most often 1 nF (then 100 nF).
  • The RESET_N pin has a series resistor on 10 of 11 designs, most often 1 kΩ (then 30 Ω).
  • The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 10 µF).
  • The RESET_N pin has a pull-up to 3.3V on 5 of 11 designs, most often 10 kΩ.
GNDpin 1Connected to: GND 100%
RESET_Npin 2Connected to: CC1110F32RHHR 45%, the microcontroller 36%, FT2232HL 27%
  • Capacitor to GND on 91% · 1 nF (5), 100 nF (4)
  • Series resistor on 91% · 1 kΩ (6), 30 Ω (3), 33 Ω (1)
  • Pull-up to 3.3V on 45% · 10 kΩ (4)
VDDpin 3Connected to: 3.3V 100%
  • Decoupling capacitor on 55% · 100 nF (5), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Openlst hw by OpenLST, OpenLST by diegosvs, Ninepin ux by jusii and HarvardSatelliteGroundstation by AlexFWulff.

The TLV803SDBZR in open source designs

The gallery holds 11 open source boards using the TLV803SDBZR from 11 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 100 components.

91% use four copper layers or more, and 36% carry an open source license.

The most starred is Openlst hw by OpenLST.

Microcontrollers on boards using the TLV803SDBZR

What boards using the TLV803SDBZR are built for

TLV803SDBZR: common questions

Where can I find a TLV803SDBZR reference design?

Each of the 11 boards on this page is a real design using the TLV803SDBZR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TLV803SDBZR RESET_N pin connected?

The RESET_N pin has a capacitor to GND on 10 of 11 designs, most often 1 nF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the TLV803SDBZR.

What decoupling capacitors do designs use on the TLV803SDBZR VDD pin?

The VDD pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the TLV803SDBZR.

What parts are used alongside the TLV803SDBZR?

The CC1110F32RHHR, FT5HNBPK27.0-T1, LM1117IMP-3.3/NOPB, LT1086-3.6 and RFFM6403SB appear in the most repositories here.

Which microcontrollers do boards using the TLV803SDBZR use?

Most are built on RP2040/RP2350 (4) and NXP (1).

How big is a typical board using the TLV803SDBZR?

The median is 60 × 50 mm, and 9% are two-layer designs.

What is the most popular open source board using the TLV803SDBZR?

By GitHub stars, Openlst hw by OpenLST, with 37 stars.

Can I simulate one of these boards using the TLV803SDBZR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part