Esp32-controller
yvolodym·esp32-controller·kicad/esp32-controller.kicad_pcb
About the Esp32-controller PCB
Esp32-controller is an open source ESP32 PCB design by yvolodym, published on GitHub. It is a 4-layer board measuring 100 × 70 mm, with 51 components from 31 distinct parts.
Its main chip is the ESP32-WROVER-IB, from the ESP32 family. Other key parts include the Joystick Analog, CH340C, TP4056-42-ESOP8, USBLC6-2P6 and U8205A. By type, the board carries 18 resistors, 12 ICs, 9 capacitors, 5 diodes, 3 transistors and 2 connectors.
It belongs with the power & battery, iot & wireless and displays & leds designs in this gallery.
From the project
ESP32 wireless game controller using ESP-NOW with dual joysticks, ST7789 SPI display, and battery monitoring (native ESP-IDF)
ESP32-WROVER based wireless game controller. Two resistive (potentiometer) analog joysticks plus an ST7789 SPI display, transmitting over ESP-NOW. Firmware uses native ESP-IDF — see CLAUDE.md for architecture and pin layout details.
CLAUDE.md is the source of truth — the lists below are a quick reference. All pins verified against kicad/esp32-controller.kicadsch and kicad/supply.kicadsch.
Main components on the Esp32-controller
Esp32-controller bill of materials (BOM)
51 components, 31 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROVER-IB | ESP32-WROVER-IB | U1 |
| 2 | Joystick Analog | Joystick_Analog | U2, U3 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U4 |
| 1 | TP4056-42-ESOP8 | SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias | U5 |
| 1 | USBLC6-2P6 | SOT-23-6 | U6 |
| 1 | U8205A | SOT-23-6 | U7 |
| 1 | DW01A | SOT-23-6 | U8 |
| 1 | LTC4412 | TSOT-23-6 | U9 |
| 1 | Switch | SW_SPDT_PCM12 | U10 |
| 1 | Battery | NCR18650B | U11 |
| 1 | AP2112K-3.3 | SOT-23-5 | U12 |
| 2 | BCW66G | SOT-23 | Q1, Q2 |
| 1 | Si2319CDS | SOT-23 | Q3 |
| 1 | Conn_01x08_Socket | PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | USB_C_Plug_USB2.0 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | P1 |
| 1 | RESET | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW1 |
| 1 | BOOT | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW2 |
| 2 | YELLOW | D_0603_1608Metric | D1, D2 |
| 1 | LED_RED | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D3 |
| 1 | SS14 | D_SMA | D4 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED_GREEN | LED_D2.0mm_W4.8mm_H2.5mm_FlatTop | D5 |
| 5 | 100nF | C_1206_3216Metric | C1, C2, C3, C7, C9 |
| 4 | 10µF | C_1206_3216Metric | C4, C5, C6, C8 |
| 1 | 220K | R_1206_3216Metric | R1 |
| 1 | 100K | R_1206_3216Metric | R2 |
| 3 | 2K | R_1206_3216Metric | R3, R4, R15 |
| 5 | 10K | R_1206_3216Metric | R5, R6, R7, R8, R9 |
| 3 | 470 | R_1206_3216Metric | R10, R11, R18 |
| 2 | 1K | R_1206_3216Metric | R12, R16 |
| 2 | 5.1k | R_1206_3216Metric | R13, R14 |
| 1 | 100 | R_1206_3216Metric | R17 |
Esp32-controller design files
The KiCad project lives in the yvolodym/esp32-controller repository on GitHub; these links point at the commit this page was built from.
Esp32-controller: common questions
What microcontroller does the Esp32-controller use?
The Esp32-controller is built around the ESP32-WROVER-IB, from the ESP32 family.
How big is the Esp32-controller PCB?
The Esp32-controller measures 100 × 70 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32-controller?
51 components, from 31 distinct parts. The full bill of materials is listed on this page.
Where can I download the Esp32-controller design files?
From the yvolodym/esp32-controller repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Esp32-controller design in my own project?
The repository has no license, so all rights stay with yvolodym. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k