MiAM PAMI DCShield

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_PAMI_DCShield/MiAM_PAMI_DCShield.kicad_pcb

MiAM PAMI DCShield PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM PAMI DCShield PCB

MiAM PAMI DCShield is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 43.7 × 54.2 mm, with 11 components from 8 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the TB6612FNG.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM PAMI DCShield

MiAM PAMI DCShield bill of materials (BOM)

11 components, 8 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
TB6612FNG
U4
1
Screw_Terminal_01x02
BAT1
3
Conn_01x02_Male
EMGBUT1, PSW1, UART2
1
~
GPIO1
1
Conn_02x04_Odd_Even
I2C1
2
Conn_01x06_Male
MOT1, MOT2
1
Conn_02x03_Odd_Even
SRV1

MiAM PAMI DCShield design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM PAMI DCShield: common questions

What microcontroller does the MiAM PAMI DCShield use?

The MiAM PAMI DCShield is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the MiAM PAMI DCShield PCB?

The MiAM PAMI DCShield measures 43.7 × 54.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM PAMI DCShield?

11 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM PAMI DCShield design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM PAMI DCShield design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM PAMI DCShield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards