MiAM ESP32

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_ESP32/MiAM_ESP32.kicad_pcb

MiAM ESP32 PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM ESP32 PCB

MiAM ESP32 is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 64.5 × 52.3 mm, with 18 components from 15 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the 3V3, MT3608, TB6612FNG and LM7805_TO220. By type, the board carries 8 connectors, 5 ICs, 2 capacitors, 2 resistors and 1 diode.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM ESP32

MiAM ESP32 bill of materials (BOM)

18 components, 15 distinct parts.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
3V3
U2
1
MT3608
U3
1
TB6612FNG
U4
1
LM7805_TO220
U5
2
Conn_01x06_Male
J1, J2
1
Screw_Terminal_01x02
J3
1
Conn_01x04_Male
J6
2
Conn_01x02_Male
J7, J14
2
Conn_01x03_Male
J9, J10
1
D_Schottky
D1
1
0.22uF
C1
1
0.1uF
C2
1
100k
R1
1
10k
R2

MiAM ESP32 design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM ESP32: common questions

What microcontroller does the MiAM ESP32 use?

The MiAM ESP32 is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the MiAM ESP32 PCB?

The MiAM ESP32 measures 64.5 × 52.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM ESP32?

18 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM ESP32 design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM ESP32 design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM ESP32 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards