MiAM SupervisorBoard

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_SupervisorBoard/MiAM_SupervisorBoard.kicad_pcb

MiAM SupervisorBoard PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM SupervisorBoard PCB

MiAM SupervisorBoard is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 104.4 × 63.5 mm, with 29 components from 16 distinct parts.

Its main chip is the ESP32-CAM, from the ESP32 family. Other key parts include the Mini560, WT32-ETH01 and 9V. By type, the board carries 6 connectors, 5 jumpers, 5 switches, 4 ICs and 1 diode.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM SupervisorBoard

MiAM SupervisorBoard bill of materials (BOM)

29 components, 16 distinct parts.

QtyPartRefs
1
Mini560
IC1
1
WT32-ETH01
U1
1
ESP32-CAM
U2
1
9V
U3
1
ST7789_TFT_Screen
J1
1
Screw_Terminal_01x02
J2
1
Conn_01x05_Pin
J3
1
Conn_02x03_Odd_Even
J4
1
Conn_01x02_Pin
J5
1
Conn_01x04_Pin
J6
1
Conn_01x02_Male
EMGBUT1
5
SolderJumper_2_Open
JP1, JP2, JP3, JP4, JP5
7
Screw_Terminal_01x02
OUT1, OUT2, OUT3, OUT4, OUT5, OUT6, PWRBUT1
3
SW_Push
SW1, SW2, SW3
2
SW_Push
SW4, SW5
1
D_Schottky
D1

MiAM SupervisorBoard design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM SupervisorBoard: common questions

What microcontroller does the MiAM SupervisorBoard use?

The MiAM SupervisorBoard is built around the ESP32-CAM, from the ESP32 family.

How big is the MiAM SupervisorBoard PCB?

The MiAM SupervisorBoard measures 104.4 × 63.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM SupervisorBoard?

29 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM SupervisorBoard design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM SupervisorBoard design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM SupervisorBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards