MiAM PAMI V3 DC

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_PAMI_V3_DC/MiAM_PAMI_V3_DC.kicad_pcb

MiAM PAMI V3 DC PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM PAMI V3 DC PCB

MiAM PAMI V3 DC is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 62 × 95 mm, with 26 components from 23 distinct parts.

Its main chip is the ESP32-DEVKITC-32U, from the ESP32 family. Other key parts include the 3V3, MT3608, 5V and TB6612FNG. By type, the board carries 6 ICs, 6 connectors, 4 resistors, 2 diodes, 1 transistor and 1 switch.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM PAMI V3 DC

MiAM PAMI V3 DC bill of materials (BOM)

26 components, 23 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32U
U1
1
3V3
U2
1
MT3608
U3
1
5V
U4
1
~
U5
1
TB6612FNG
U6
1
BS170F
Q1
3
TCRT5000L_Breakout
J1, J4, J5
1
Conn_01x03_Male
J2
1
SSD1306_vertical
J3
1
Conn_01x02_Pin
J8
1
Screw_Terminal_01x02
BAT1
1
Conn_01x02_Male
EMGBUT1
2
Conn_01x06_Male
MOT1, MOT2
1
Conn_02x03_Odd_Even
SRV1
1
SW_DPDT_x2
SW1
1
Conn_01x02_Male
UART1
1
LED
D1
1
D_Schottky
D2
1
100k
R1
Show 3 more
QtyPartRefs
1
10k
R2
1
50k
R3
1
200
R4

MiAM PAMI V3 DC design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM PAMI V3 DC: common questions

What microcontroller does the MiAM PAMI V3 DC use?

The MiAM PAMI V3 DC is built around the ESP32-DEVKITC-32U, from the ESP32 family.

How big is the MiAM PAMI V3 DC PCB?

The MiAM PAMI V3 DC measures 62 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM PAMI V3 DC?

26 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM PAMI V3 DC design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM PAMI V3 DC design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM PAMI V3 DC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards