MiAM PAMI PowerShield

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_PAMI_PowerShield/MiAM_PAMI_PowerShield.kicad_pcb

MiAM PAMI PowerShield PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM PAMI PowerShield PCB

MiAM PAMI PowerShield is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 28.7 × 54.7 mm, with 8 components from 8 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the 3V3, MT3608 and LM7805_TO220. By type, the board carries 4 ICs, 2 capacitors and 2 resistors.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM PAMI PowerShield

MiAM PAMI PowerShield bill of materials (BOM)

8 components, 8 distinct parts.

QtyPartRefs
1
3V3
U2
1
MT3608
U3
1
LM7805_TO220
U4
1
ESP32-DEVKIT-V1
U5
1
0.22uF
C1
1
0.1uF
C2
1
100k
R1
1
10k
R2

MiAM PAMI PowerShield design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM PAMI PowerShield: common questions

What microcontroller does the MiAM PAMI PowerShield use?

The MiAM PAMI PowerShield is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the MiAM PAMI PowerShield PCB?

The MiAM PAMI PowerShield measures 28.7 × 54.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM PAMI PowerShield?

8 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM PAMI PowerShield design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM PAMI PowerShield design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM PAMI PowerShield without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards