MiAM PAMI V3 Stepper

14chanwa·MiAM_robotics_ESP32·Electronics/eurobot2023/MiAM_PAMI_V3_Stepper/MiAM_PAMI_V3_Stepper.kicad_pcb

MiAM PAMI V3 Stepper PCB layout, top view — open source ESP32 board by 14chanwa

About the MiAM PAMI V3 Stepper PCB

MiAM PAMI V3 Stepper is an open source ESP32 PCB design by 14chanwa, published on GitHub. It is a 2-layer board measuring 62 × 95 mm, with 33 components from 23 distinct parts.

Its main chip is the ESP32-DEVKITC-32U, from the ESP32 family. Other key parts include the 5V, MT3608 and Pololu_Breakout_A4988. By type, the board carries 9 connectors, 5 ICs, 3 resistors, 2 modules, 2 diodes and 2 capacitors.

It belongs with the robotics & motion designs in this gallery.

From the project

MiAM robotics repository for ESP32 based PAMIs and boards

Main components on the MiAM PAMI V3 Stepper

MiAM PAMI V3 Stepper bill of materials (BOM)

33 components, 23 distinct parts.

QtyPartRefs
1
ESP32-DEVKITC-32U
U1
2
5V
U2, U4
1
MT3608
U3
1
~
U5
2
Pololu_Breakout_A4988
A1, A2
3
TCRT5000L_Breakout
J1, J4, J5
1
Conn_01x03_Male
J2
1
SSD1306_vertical
J3
3
Conn_01x02_Pin
J6, J7, J8
1
Conn_01x01_Pin
J9
1
Screw_Terminal_01x02
BAT1
1
Conn_01x02_Male
EMGBUT1
2
Conn_01x04_Male
MOT1, MOT2
3
SolderJumper_2_Open
MS1, MS2, MS3
1
Conn_02x03_Odd_Even
SRV1
1
SW_DPDT_x2
SW1
1
Conn_01x02_Male
UART1
1
LED
D1
1
D_Schottky
D2
2
100uF
C3, C4
Show 3 more
QtyPartRefs
1
100k
R1
1
10k
R2
1
200
R4

MiAM PAMI V3 Stepper design files

The KiCad project lives in the 14chanwa/MiAM_robotics_ESP32 repository on GitHub; these links point at the commit this page was built from.

MiAM PAMI V3 Stepper: common questions

What microcontroller does the MiAM PAMI V3 Stepper use?

The MiAM PAMI V3 Stepper is built around the ESP32-DEVKITC-32U, from the ESP32 family.

How big is the MiAM PAMI V3 Stepper PCB?

The MiAM PAMI V3 Stepper measures 62 × 95 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MiAM PAMI V3 Stepper?

33 components, from 23 distinct parts. The full bill of materials is listed on this page.

Where can I download the MiAM PAMI V3 Stepper design files?

From the 14chanwa/MiAM_robotics_ESP32 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the MiAM PAMI V3 Stepper design in my own project?

The repository has no license, so all rights stay with 14chanwa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MiAM PAMI V3 Stepper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in MiAM_robotics_ESP32

Similar boards