7 open source boards using the SG-210STF 66.6667ML3

Real designs built with the SG-210STF 66.6667ML3, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

The SG-210STF 66.6667ML3 in open source designs

The gallery holds 7 open source boards using the SG-210STF 66.6667ML3 from 3 GitHub repositories; a typical one measures about 33 × 16 mm and carries around 97 components.

100% use four copper layers or more, and 29% carry an open source license.

The most starred is Miniscope v4-Rigid-Flex by Aharoni-Lab.

Microcontrollers on boards using the SG-210STF 66.6667ML3

What boards using the SG-210STF 66.6667ML3 are built for

SG-210STF 66.6667ML3: common questions

Where can I find a SG-210STF 66.6667ML3 reference design?

Each of the 7 boards on this page is a real design using the SG-210STF 66.6667ML3. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the SG-210STF 66.6667ML3?

The BNO055, DS90UB913ATRTVTQ1, LTC3218, MAX14574EWL+ and TPL0102-100RUCR appear in the most repositories here.

Which microcontrollers do boards using the SG-210STF 66.6667ML3 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the SG-210STF 66.6667ML3?

The median is 33 × 16 mm, and 0% are two-layer designs.

What is the most popular open source board using the SG-210STF 66.6667ML3?

By GitHub stars, Miniscope v4-Rigid-Flex by Aharoni-Lab, with 161 stars.

Can I simulate one of these boards using the SG-210STF 66.6667ML3 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part