3 open source boards using the LMV321IDCKR
Real designs built with the LMV321IDCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Miniscope v4-Rigid-Flex
Aharoni-Lab
30 × 57.3 mm109 parts6LGPL-3.0161RP2040/RP2350
MioLink
Misaka0x2730
53 × 42 mm92 parts4LGPL-3.027RP2040/RP2350
MioLink Pico
Misaka0x2730
53 × 54 mm53 parts4LGPL-3.027
The LMV321IDCKR in open source designs
The gallery holds 3 open source boards using the LMV321IDCKR from 2 GitHub repositories; a typical one measures about 53 × 54 mm and carries around 92 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is Miniscope v4-Rigid-Flex by Aharoni-Lab.
Microcontrollers on boards using the LMV321IDCKR
What boards using the LMV321IDCKR are built for
LMV321IDCKR: common questions
Where can I find a LMV321IDCKR reference design?
Each of the 3 boards on this page is a real design using the LMV321IDCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LMV321IDCKR use?
Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the LMV321IDCKR?
The median is 53 × 54 mm, and 0% are two-layer designs.
What is the most popular open source board using the LMV321IDCKR?
By GitHub stars, Miniscope v4-Rigid-Flex by Aharoni-Lab, with 161 stars.
Can I simulate one of these boards using the LMV321IDCKR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.