Plusd no route
About the Plusd no route PCB
Plusd no route is an open source PCB design by alvaroalea, published on GitHub. It is a 2-layer board measuring 106.7 × 83.8 mm, with 47 components from 27 distinct parts.
Other key parts include the 74LS06, 2764, WD1772, 74LS00 and 74LS126. By type, the board carries 17 capacitors, 11 ICs, 9 resistors, 4 connectors, 4 diodes and 1 crystal.
It belongs with the test & measurement designs in this gallery.
From the project
Schematic of a clone of the Disk Interface +D for the ZX Spectrum
UNDER LICENSE Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International (CC BY-NC-SA 4.0) - If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original. - You may not use the material for commercial purposes. - You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
Main components on the Plusd no route
Plusd no route bill of materials (BOM)
47 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS06 | DIP-14_W7.62mm_LongPads | U1 |
| 1 | 2764 | DIP-28_W15.24mm_LongPads | U2 |
| 1 | WD1772 | DIP-28_W15.24mm_LongPads | U3 |
| 1 | 74LS00 | DIP-14_W7.62mm_LongPads | U4 |
| 1 | 74LS126 | DIP-14_W7.62mm_LongPads | U5 |
| 1 | 74LS175 | DIP-16_W7.62mm_LongPads | U6 |
| 1 | 62256 | DIP-28_W15.24mm_LongPads | U7 |
| 1 | PAL20L8 | DIP-24_W7.62mm_LongPads | U8 |
| 1 | 74LS374 | DIP-20_W7.62mm_LongPads | U9 |
| 1 | 74LS27 | DIP-14_W7.62mm_LongPads | U10 |
| 1 | L7805 | TO-220-3_Vertical | U12 |
| 1 | 8.000Mhz | Crystal_HC18-U_Vertical | Y1 |
| 1 | Conn_02x17_Odd_Even | PinHeader_2x17_P2.54mm_Vertical | J1 |
| 1 | ZX_Spectrum_Connector_GENERIC_SORTED | ZX_CONN | J2 |
| 1 | Conn_02x13_Odd_Even | PinHeader_2x13_P2.54mm_Vertical | J3 |
| 1 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | SW_DPST_x2 | SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 3 | 1N4148 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D3, D4 |
| 1 | LED | LED_D5.0mm | D2 |
| 3 | 100u | CP_Radial_D7.5mm_P2.50mm | C1, C6, C7 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 33p | C_Disc_D5.0mm_W2.5mm_P2.50mm | C2 |
| 11 | 100n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C3, C8, C9, C10, C11, C12, C13, C14 +3 |
| 1 | 100p | C_Disc_D5.0mm_W2.5mm_P2.50mm | C4 |
| 1 | 10n | C_Disc_D5.0mm_W2.5mm_P2.50mm | C5 |
| 4 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
| 4 | 2K2 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5, R6, R7, R9 |
| 1 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
Plusd no route design files
The KiCad project lives in the alvaroalea/plusD-clone repository on GitHub; these links point at the commit this page was built from.
- Layoutplusd_no_route.kicad_pcb
Plusd no route: common questions
How big is the Plusd no route PCB?
The Plusd no route measures 106.7 × 83.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Plusd no route?
47 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Plusd no route design files?
From the alvaroalea/plusD-clone repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Plusd no route design in my own project?
The repository has no license, so all rights stay with alvaroalea. Use it as a reference, and ask the author before reusing the design.
More boards in plusD-clone
Similar boards
LevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k
StackLink
52.3 × 10.5 mm5 parts2LGPL-3.05.0k
AnalyzerBoxPCB fork
52.7 × 47.9 mm54 parts4LGPL-3.05.0k
EleLab v2 Bus100
Chrismettal
100 × 100 mm37 parts2LGPL-3.0528
EleLab v2 Bus150
150 × 50 mm37 parts2LGPL-3.0528
EleLab v2 PowerFeed
68 × 50 mm11 parts2LGPL-3.0528