17 open source boards using the NCP167BMX330TBG
Real designs built with the NCP167BMX330TBG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Open Source Smart Glasses
Mentra-Community
93 × 10.5 mm80 parts4LMIT1.2kESP32
ILDAWaveX16
stanleyondrus
52.8 × 55 mm94 parts2LNo license43ESP32
Sonatino
luminationlabs
65 × 30 mm117 parts4LCERN-OHL-P-2.039ESP32
Esp32-tv hardware
atomic14
48 × 35.1 mm79 parts4LNo license29ESP32
GLARE
RR-CREATOR
102.4 × 27.5 mm86 parts4LMIT10ESP32
Main board tft
atomic14
34 × 34 mm44 parts2LNo license2ChariotFC
Rispats
272.4 × 570.4 mm106 parts2LNo license1STM32
MagnumFC
poojithas956
43.6 × 43 mm129 parts6LMIT0RP2040/RP2350
EnokiEEG-v2
io-tronic
39.5 × 39.5 mm92 parts4LNo license0RP2040/RP2350
Open Source Smart Glasses
aezrapour
93 × 10.5 mm80 parts4LMIT0ESP32
ESP-32-ruler
rapha-tech
38 × 151.9 mm58 parts2LNo license0ESP32
ENGR342
NotaScout
26.5 × 45 mm34 parts6LMIT0ESP32
VENDETTAFC
Caped-Crussader
43.6 × 43 mm129 parts6LCERN-OHL-S-2.028ESP32
Main board
atomic14
85 × 85 mm43 parts2LNo license2RP2040/RP2350
EnokiEEG-v2-rounded
io-tronic
39.5 × 39.5 mm92 parts4LNo license0RP2040/RP2350
EnokiEEG-v2-rounded-MAIN ONLY
io-tronic
39.5 × 39.5 mm72 parts4LNo license0RP2040/RP2350
Wand
adeboni
17.5 × 32 mm52 parts4LGPL-3.00
How designs wire the NCP167BMX330TBG
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the NCP167BMX330TBG connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 3.3V on 12 of 14 designs (a signal on 2).
- The IN pin is tied to 5V on 10 of 14 designs (a signal on 4).
- The EN pin is tied to 5V on 9 of 14 designs (a signal on 5).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| OUTpin 1 | Connected to: 3.3V 86% | — |
| GNDpin 2 | Connected to: GND 86% | — |
| ENpin 3 | Connected to: 5V 64% · a signal 36% | — |
| INpin 4 | Connected to: 5V 71% · a signal 29% | — |
| EPADpin 5 | Connected to: GND 86% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open Source Smart Glasses by Mentra-Community, ILDAWaveX16 by stanleyondrus, Sonatino by luminationlabs and Esp32-tv hardware by atomic14.
The NCP167BMX330TBG in open source designs
The gallery holds 17 open source boards using the NCP167BMX330TBG from 14 GitHub repositories; a typical one measures about 43.6 × 39.5 mm and carries around 80 components.
71% use four copper layers or more, and 47% carry an open source license.
The most starred is Open Source Smart Glasses by Mentra-Community.
Parts used alongside the NCP167BMX330TBG
Microcontrollers on boards using the NCP167BMX330TBG
What boards using the NCP167BMX330TBG are built for
NCP167BMX330TBG: common questions
Where can I find a NCP167BMX330TBG reference design?
Each of the 17 boards on this page is a real design using the NCP167BMX330TBG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NCP167BMX330TBG OUT pin connected?
The OUT pin is tied to 3.3V on 12 of 14 designs (a signal on 2). Counted from the KiCad layouts of 14 open source designs using the NCP167BMX330TBG.
How is the NCP167BMX330TBG IN pin connected?
The IN pin is tied to 5V on 10 of 14 designs (a signal on 4). Counted from the KiCad layouts of 14 open source designs using the NCP167BMX330TBG.
How is the NCP167BMX330TBG EN pin connected?
The EN pin is tied to 5V on 9 of 14 designs (a signal on 5). Counted from the KiCad layouts of 14 open source designs using the NCP167BMX330TBG.
What parts are used alongside the NCP167BMX330TBG?
The AP5054HTC, CH9102F, MAX17048, SY7088 and USBLC6-2P6 appear in the most repositories here.
Which microcontrollers do boards using the NCP167BMX330TBG use?
Most are built on ESP32 (9), RP2040/RP2350 (6) and STM32 (1).
How big is a typical board using the NCP167BMX330TBG?
The median is 43.6 × 39.5 mm, and 29% are two-layer designs.
What is the most popular open source board using the NCP167BMX330TBG?
By GitHub stars, Open Source Smart Glasses by Mentra-Community, with 1,235 stars.
Can I simulate one of these boards using the NCP167BMX330TBG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.