3 open source boards using the OWMMOD-403010A-S261F

Real designs built with the OWMMOD-403010A-S261F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The OWMMOD-403010A-S261F in open source designs

The gallery holds 3 open source boards using the OWMMOD-403010A-S261F from 2 GitHub repositories; a typical one measures about 48 × 35.1 mm and carries around 44 components.

67% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.

The most starred is Esp32-tv hardware by atomic14.

Parts used alongside the OWMMOD-403010A-S261F

Microcontrollers on boards using the OWMMOD-403010A-S261F

What boards using the OWMMOD-403010A-S261F are built for

OWMMOD-403010A-S261F: common questions

Where can I find a OWMMOD-403010A-S261F reference design?

Each of the 3 boards on this page is a real design using the OWMMOD-403010A-S261F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the OWMMOD-403010A-S261F?

The MAX98357AETE+T, NCP167BMX330TBG and USBLC6-2P6 appear in the most repositories here.

Which microcontrollers do boards using the OWMMOD-403010A-S261F use?

Most are built on ESP32 (3).

How big is a typical board using the OWMMOD-403010A-S261F?

The median is 48 × 35.1 mm, and 67% are two-layer designs.

What is the most popular open source board using the OWMMOD-403010A-S261F?

By GitHub stars, Esp32-tv hardware by atomic14, with 29 stars.

Can I simulate one of these boards using the OWMMOD-403010A-S261F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part