4 open source boards using the TPS62740DSST

Real designs built with the TPS62740DSST, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The TPS62740DSST in open source designs

The gallery holds 4 open source boards using the TPS62740DSST from 3 GitHub repositories; a typical one measures about 73.5 × 40 mm and carries around 36 components.

100% use four copper layers or more, and 75% carry an open source license.

The most starred is Carrier chk by bhadkamkar9snehil.

Microcontrollers on boards using the TPS62740DSST

What boards using the TPS62740DSST are built for

TPS62740DSST: common questions

Where can I find a TPS62740DSST reference design?

Each of the 4 boards on this page is a real design using the TPS62740DSST. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the TPS62740DSST?

The CC1101RGPR, ESP32-S3-WROOM-1-N8R8, MicroSD_Card, PN5180A0ET/C110F and TP4056 appear in the most repositories here.

Which microcontrollers do boards using the TPS62740DSST use?

Most are built on ESP32 (2) and Nordic nRF (2).

How big is a typical board using the TPS62740DSST?

The median is 73.5 × 40 mm, and 0% are two-layer designs.

What is the most popular open source board using the TPS62740DSST?

By GitHub stars, Carrier chk by bhadkamkar9snehil, with 1 stars.

Can I simulate one of these boards using the TPS62740DSST before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part