Tangnano9k kr260-hat
calperxd·tangnano9k-kr260-hat·hardware/tangnano9k-kr260-hat.kicad_pcb
About the Tangnano9k kr260-hat
Tangnano9k kr260-hat is an open source FPGA PCB design by calperxd, published on GitHub under the Custom license license. It is a 4-layer board measuring 65 × 56.5 mm, with 168 components from 49 distinct parts.
Its main chip is the GW1NR-LV9QN88PC6/I5, from the FPGA family. Other key parts include the USBLC6-2SC6, TMI7003C, ME6211C12M5G-N, W25Q32JVZPIQ and FT2232HL-REEL. By type, the board carries 62 capacitors, 56 resistors, 17 diodes, 13 ICs, 10 inductors and 4 connectors.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
FPGA HAT for the AMD Kria KR260 based on the Tang Nano 9K (Gowin GW1NR-9, FT2232H, 16-bit parallel link on J21): KiCad 10 schematic, 4-layer PCB and JLCPCB production files
Hardware, firmware, integration and validation requirements for a custom FPGA board based on the Tang Nano 9K, installed directly on the 40-pin J21 header of the KR260.
Create a new PCB with the FPGA soldered directly onto it, preserving the selected set of Tang Nano 9K functions and adding a communication interface with the KR260 programmable logic through J21. This is not an adapter board for plugging in a ready-made Tang Nano 9K.

Main components on the Tangnano9k kr260-hat
Tangnano9k kr260-hat bill of materials (BOM)
168 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USBLC6-2SC6 | SOT-23-6 | U1 |
| 1 | TMI7003C | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm | U2 |
| 1 | ME6211C12M5G-N ME6211C12M5 | SOT-23-5 | U3 |
| 1 | GW1NR-LV9QN88PC6/I5 | GW1NR_QN88P_10x10mm_P0.4mm_EP6.8mm | U4 |
| 1 | W25Q32JVZPIQ | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm | U5 |
| 1 | FT2232HL-REEL FT2232HL | LQFP-64_10x10mm_P0.5mm | U90 |
| 1 | 93LC56BT-I/SN 93LC56B | SOIC-8_3.9x4.9mm_P1.27mm | U91 |
| 1 | SN74AVC4T774PWR SN74AVC4T774PW | TSSOP-16_4.4x5mm_P0.65mm | U92 |
| 3 | SN74LVC244APWR 74LVC244A | TSSOP-20_4.4x6.5mm_P0.65mm | U130, U131, U132 |
| 1 | SN74LVC3G17DCUR 74LVC3G17 | VSSOP-8_2.3x2mm_P0.5mm | U133 |
| 1 | SN74LVC1G00DBVR 74LVC1G00 | SOT-23-5 | U134 |
| 1 | OT2JI-111-27M 27MHz | Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm | Y1 |
| 1 | X322512MSB4SI 12MHz ±30ppm | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y90 |
| 1 | TYPE-C-31-M-12 USB_C_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | 1040310811 microSD (TF) | microSD_HC_Molex_104031-0811 | J2 |
| 1 | PZ254V-11-06P JTAG ext. 1V8 | PinHeader_1x06_P2.54mm_Vertical | J90 |
| 1 | C132132 KR260 J21 (2x20 female, bottom side) | PinSocket_2x20_P2.54mm_Vertical | J130 |
| 1 | NSMD050-33V PTC 0.5A hold (size per PWR-04) | Fuse_1206_3216Metric | F1 |
| 1 | Isolate FT2232H (external programmer) | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP90 |
| 1 | PTS810SJG250SMTRLFS S1 (user button) | SW_SPST_PTS810 | SW1 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PTS810SJG250SMTRLFS S2 (user button, JTAGSEL_N) | SW_SPST_PTS810 | SW2 |
| 1 | SMAJ5.0A | D_SMA | D1 |
| 1 | LTST-C190KFKT LED orange (power) | LED_0603_1608Metric | D2 |
| 2 | C8598 B5819W | D_SOD-123 | D3, D4 |
| 7 | 0402ESDA-05N | D_0402_1005Metric | D30, D31, D70, D71, D72, D73, D74 |
| 6 | LTST-C190KFKT LED orange | LED_0603_1608Metric | D32, D33, D34, D35, D36, D37 |
| 7 | UPZ1005D121-1R3TF | L_0402_1005Metric | FB1, FB2, FB3, FB4, FB30, FB90, FB91 |
| 3 | C237554 2.2uH | L_Murata_DFE201610P | L1, L2, L3 |
| 3 | 18PF 18pF | C_0402_1005Metric | C1, C2, C3 |
| 17 | 10UF 10uF | C_0603_1608Metric | C4, C5, C11, C14, C30, C32, C33, C34 +9 |
| 4 | 22UF 22uF | C_0603_1608Metric | C6, C7, C8, C9 |
| 3 | 2.2UF 2.2uF | C_0402_1005Metric | C10, C12, C13 |
| 30 | 100NF 100nF | C_0402_1005Metric | C31, C37, C38, C45, C46, C47, C48, C49 +22 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C90, C92 |
| 1 | 3.3UF 3.3uF | C_0603_1608Metric | C95 |
| 2 | 27PF 27pF | C_0402_1005Metric | C103, C104 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 2 | 680K 680k | R_0402_1005Metric | R3, R5 |
| 3 | 150K 150k | R_0402_1005Metric | R4, R6, R8 |
| 1 | 300K 300k | R_0402_1005Metric | R7 |
| 2 | 1k | R_0402_1005Metric | R9, R91 |
| 7 | 4.7K 4.7k | R_0402_1005Metric | R10, R30, R31, R32, R70, R71, R155 |
| 10 | 10K 10k | R_0402_1005Metric | R11, R33, R34, R72, R73, R92, R93, R94 +2 |
| 21 | 22R | R_0402_1005Metric | R35, R97, R98, R130, R131, R132, R133, R134 +13 |
| 1 | C17168 0R | R_0402_1005Metric | R74 |
| 1 | C25752 12k 1% | R_0402_1005Metric | R90 |
| 1 | 2.2K 2.2k | R_0402_1005Metric | R95 |
| 3 | 3.3K 3.3k | R_0402_1005Metric | R150, R151, R152 |
| 2 | 100K 100k | R_0402_1005Metric | R153, R154 |
Tangnano9k kr260-hat design files
The KiCad project lives in the calperxd/tangnano9k-kr260-hat repository on GitHub; these links point at the commit this page was built from.
Tangnano9k kr260-hat: common questions
What microcontroller does the Tangnano9k kr260-hat use?
The Tangnano9k kr260-hat is built around the GW1NR-LV9QN88PC6/I5, from the FPGA family.
How big is the Tangnano9k kr260-hat?
The Tangnano9k kr260-hat measures 65 × 56.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tangnano9k kr260-hat?
168 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Tangnano9k kr260-hat design files?
From the calperxd/tangnano9k-kr260-hat repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Tangnano9k kr260-hat design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Tangnano9k kr260-hat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765