17 open source boards using the SN74LVC244APWR
Real designs built with the SN74LVC244APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenPCIE
chili-chips-ba
179.1 × 92.3 mm170 parts4LBSD-3-Clause102Jammanator pi
KabukiFlux
132.5 × 105.8 mm142 parts2LMIT4STM32
Bldc esc
EwoudVV
544 × 768 mm421 parts4LNo license1FPGA
SN-64
FantomZap
101.8 × 80.5 mm383 parts6LNo license1ESP32
Ptz driver
Aottens
100 × 80 mm251 parts4LNo license0FPGA
Tangnano9k kr260-hat
calperxd
65 × 56.5 mm168 parts4LCustom license0Microphone array v2
pentolope
120 × 120 mm103 parts4LNo license0Merged17
pentolope
120 × 120 mm103 parts4LNo license0WCH CH32/CH55x
Tile
Bruhdows
68 × 68 mm109 parts4LNo license1ESP32
Rev a input
Aottens
100 × 80 mm251 parts4LNo license0Reroute signals only
pentolope
120 × 120 mm103 parts4LNo license0Microphone array v2
pentolope
120 × 120 mm103 parts4LNo license0Reroute signals only
pentolope
120 × 120 mm103 parts4LNo license0Reroute via clean
pentolope
120 × 120 mm103 parts4LNo license0Reroute via clean
pentolope
120 × 120 mm103 parts4LNo license0Routed17
pentolope
120 × 120 mm103 parts4LNo license0ESP32
ARDF-TX UNIVERSAL CONTROLLER
DD1SB
100 × 100 mm197 parts2LMIT0
How designs wire the SN74LVC244APWR
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the SN74LVC244APWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC_20 pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 10 µF).
- The 2A1_11 pin has a series resistor on 6 of 10 designs, most often 33 Ω (then 0 Ω).
- The 1Y4_12 pin has a series resistor on 6 of 10 designs, most often 33 Ω (then 2.2 kΩ).
- The 2A2_13 pin has a series resistor on 6 of 10 designs, most often 33 Ω (then 0 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1OE_1pin 1 | Connected to: GND 50% · a signal 50% |
|
| 1A1_2pin 2 | Connected to: The microcontroller 40% |
|
| 2Y4_3pin 3 | Connected to: Signal 80% · not connected 20% |
|
| 1A2_4pin 4 | Connected to: The microcontroller 40% |
|
| 2Y3_5pin 5 | Connected to: Signal 80% · not connected 20% |
|
| 1A3_6pin 6 | Connected to: The microcontroller 40% |
|
| 2Y2_7pin 7 | Connected to: Signal 90% |
|
| 1A4_8pin 8 | Connected to: The microcontroller 40% |
|
| 2Y1_9pin 9 | Connected to: Signal 90% |
|
| GND_10pin 10 | Connected to: GND 100% | — |
| 2A1_11pin 11 | Connected to: The microcontroller 20% |
|
| 1Y4_12pin 12 | Connected to: Signal 90% |
|
| 2A2_13pin 13 | Connected to: The microcontroller 20% |
|
| 1Y3_14pin 14 | Connected to: Signal 100% |
|
| 2A3_15pin 15 | Connected to: Signal 80% · GND 20% |
|
| 1Y2_16pin 16 | Connected to: Signal 100% |
|
| 2A4_17pin 17 | Connected to: Signal 80% · GND 20% |
|
| 1Y1_18pin 18 | Connected to: Signal 100% |
|
| 2OE_19pin 19 | Connected to: GND 50% · a signal 50% |
|
| VCC_20pin 20 | Connected to: 3.3V 80% · a signal 20% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenPCIE by chili-chips-ba, Jammanator pi by KabukiFlux, Tile by Bruhdows and Bldc esc by EwoudVV.
The SN74LVC244APWR in open source designs
The gallery holds 17 open source boards using the SN74LVC244APWR from 10 GitHub repositories; a typical one measures about 120 × 120 mm and carries around 109 components.
88% use four copper layers or more, and 18% carry an open source license.
The most starred is OpenPCIE by chili-chips-ba.
Parts used alongside the SN74LVC244APWR
Microcontrollers on boards using the SN74LVC244APWR
What boards using the SN74LVC244APWR are built for
SN74LVC244APWR: common questions
Where can I find a SN74LVC244APWR reference design?
Each of the 17 boards on this page is a real design using the SN74LVC244APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC244APWR VCC_20 pin?
The VCC_20 pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 10 open source designs using the SN74LVC244APWR.
What resistor goes on the SN74LVC244APWR 2A1_11 pin?
The 2A1_11 pin has a series resistor on 6 of 10 designs, most often 33 Ω (then 0 Ω). Counted from the KiCad layouts of 10 open source designs using the SN74LVC244APWR.
What resistor goes on the SN74LVC244APWR 1Y4_12 pin?
The 1Y4_12 pin has a series resistor on 6 of 10 designs, most often 33 Ω (then 2.2 kΩ). Counted from the KiCad layouts of 10 open source designs using the SN74LVC244APWR.
What parts are used alongside the SN74LVC244APWR?
The USBLC6-2SC6, LP5907MFX-3.3/NOPB, AP2112K-3.3TRG1, SN74LVC125APWR and TLV62569DBVR appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC244APWR use?
Most are built on ESP32 (3), FPGA (2), WCH CH32/CH55x (1) and STM32 (1).
How big is a typical board using the SN74LVC244APWR?
The median is 120 × 120 mm, and 12% are two-layer designs.
What is the most popular open source board using the SN74LVC244APWR?
By GitHub stars, OpenPCIE by chili-chips-ba, with 102 stars.
Can I simulate one of these boards using the SN74LVC244APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.