8 open source boards using the SN74LVC3G17DCUR

Real designs built with the SN74LVC3G17DCUR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the SN74LVC3G17DCUR

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SN74LVC3G17DCUR connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 470 nF).
1Apin 1Connected to: A connector 33% · not connected 17%
  • Resistor to GND on 33% · 100 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 33% · 10 nF (1), 27 nF (1)
  • Series resistor on 33% · 100 kΩ (1), 10 kΩ (1)
  • Pull-up to 3.3V on 33% · 100 kΩ (1), 360 kΩ (1)
2Apin 3Connected to: A connector 50% · not connected 17%
  • Resistor to GND on 33% · 1.27 MΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 33% · 10 nF (1), 27 nF (1)
  • Series resistor on 33% · 100 kΩ (1), 10 kΩ (1)
  • Pull-up to 3.3V on 33% · 4.7 kΩ (1), 360 kΩ (1)
GNDpin 4Connected to: GND 100%
3Apin 6Connected to: A connector 50% · not connected 17%
  • Resistor to GND on 33% · 100 kΩ (1), 3.3 kΩ (1)
  • Capacitor to GND on 33% · 10 nF (1), 27 nF (1)
  • Series resistor on 33% · 100 kΩ (1), 10 kΩ (1)
  • Pull-up to 3.3V on 33% · 10 kΩ (1), 360 kΩ (1)
VCCpin 8Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (4), 470 nF (1), 10 µF (1)

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Motor module by RoboJackets, ATV-Control by mikelawrence, Mod hw duoX by mod-audio and Tangnano9k kr260-hat by calperxd.

The SN74LVC3G17DCUR in open source designs

The gallery holds 8 open source boards using the SN74LVC3G17DCUR from 6 GitHub repositories; a typical one measures about 110 × 81 mm and carries around 155 components.

50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Motorboard by RoboJackets.

Parts used alongside the SN74LVC3G17DCUR

Microcontrollers on boards using the SN74LVC3G17DCUR

What boards using the SN74LVC3G17DCUR are built for

SN74LVC3G17DCUR: common questions

Where can I find a SN74LVC3G17DCUR reference design?

Each of the 8 boards on this page is a real design using the SN74LVC3G17DCUR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the SN74LVC3G17DCUR VCC pin?

The VCC pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 470 nF). Counted from the KiCad layouts of 6 open source designs using the SN74LVC3G17DCUR.

Which microcontrollers do boards using the SN74LVC3G17DCUR use?

Most are built on AVR/Arduino (1), ESP32 (1) and FPGA (1).

How big is a typical board using the SN74LVC3G17DCUR?

The median is 110 × 81 mm, and 50% are two-layer designs.

What is the most popular open source board using the SN74LVC3G17DCUR?

By GitHub stars, Motorboard by RoboJackets, with 32 stars.

Can I simulate one of these boards using the SN74LVC3G17DCUR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part