21 open source boards using the W25Q32JVZPIQ
Real designs built with the W25Q32JVZPIQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
CB Deluxe Test Jig v1 0
neubauek
113.8 × 58 mm87 parts2LMIT50ESP32
Elixir hw
golioth
71.5 × 71.5 mm218 parts4LCERN-OHL-P-2.036FPGA
ICE40-fpga
joshajohnson
50 × 22.9 mm62 parts2LCC-BY-NC-4.026ESP32
Wizard flute
gregdavill
40.1 × 12.7 mm49 parts4LNo license8Microchip SAM
Blinky Bowtie
joshajohnson
142.7 × 72 mm95 parts2LGPL-3.054reel
o7-machinehum
117.5 × 30 mm155 parts4LMIT3Qsbc zero
qfreiman
80 × 80 mm235 parts4LGPL-3.01RP2040/RP2350
Control board
TrendBit
56 × 85 mm210 parts4LGPL-3.00FPGA
Tangnano9k kr260-hat
calperxd
65 × 56.5 mm168 parts4LCustom license0RP2040/RP2350
Rp2350-macropad
arkandas
71.4 × 99.7 mm80 parts2LMIT0ESP32
FreeX
hancho6319
33.5 × 23 mm46 parts2LNo license0CB Basic Test Jig v1 0
neubauek
93 × 58 mm47 parts2LMIT50ESP32
Panel
gregdavill
95.2 × 81.7 mm49 parts4LNo license8RP2040/RP2350
Sensor board
TrendBit
40 × 70 mm205 parts4LGPL-3.00Microchip SAM
CircuitBrains Deluxe v1 3
neubauek
29 × 29 mm31 parts2LMIT50ESP32
Esp32s2-co2-monitor
gregdavill
70.3 × 42.8 mm67 parts4LNo license178Microchip SAM
CircuitBrains Basic v1 2
neubauek
25 × 25 mm23 parts2LMIT50ESP32
ESP32S2 Breakout
gregdavill
70.3 × 42.8 mm64 parts4LNo license178RP2040/RP2350
Dspod rp2350
emeb
26.4 × 41.7 mm56 parts4LMIT10CPU board
openconcepts-ar
51.2 × 25.8 mm103 parts4LCustom license1ESP32
Esp32s2-lepton
gregdavill
34.6 × 30.8 mm62 parts4LNo license178
How designs wire the W25Q32JVZPIQ
Read from the KiCad layouts of 14 open source designs, one per repository: what each pin of the W25Q32JVZPIQ connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 2.2 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CSpin 1 | Connected to: The microcontroller 64% |
|
| GNDpin 4 | Connected to: GND 79% | — |
| VCCpin 8 | Connected to: 3.3V 67% · a signal 33% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ESP32S2 Breakout by gregdavill, CB Basic Test Jig v1 0 by neubauek, Elixir hw by golioth and ICE40-fpga by joshajohnson.
The W25Q32JVZPIQ in open source designs
The gallery holds 21 open source boards using the W25Q32JVZPIQ from 14 GitHub repositories; a typical one measures about 65 × 42.8 mm and carries around 67 components.
62% use four copper layers or more, and 57% carry an open source license.
The most starred is Esp32s2-co2-monitor by gregdavill.
Parts used alongside the W25Q32JVZPIQ
Microcontrollers on boards using the W25Q32JVZPIQ
What boards using the W25Q32JVZPIQ are built for
W25Q32JVZPIQ: common questions
Where can I find a W25Q32JVZPIQ reference design?
Each of the 21 boards on this page is a real design using the W25Q32JVZPIQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the W25Q32JVZPIQ VCC pin?
The VCC pin has a decoupling capacitor on 9 of 12 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 14 open source designs using the W25Q32JVZPIQ.
What parts are used alongside the W25Q32JVZPIQ?
The AP2112K-3.3TRG1, EA3036CQBR, ESP32-S2, MCP73831T-2ACI/OT and RP2350_60QFN appear in the most repositories here.
Which microcontrollers do boards using the W25Q32JVZPIQ use?
Most are built on ESP32 (7), RP2040/RP2350 (4), Microchip SAM (3) and FPGA (2).
How big is a typical board using the W25Q32JVZPIQ?
The median is 65 × 42.8 mm, and 38% are two-layer designs.
What is the most popular open source board using the W25Q32JVZPIQ?
By GitHub stars, Esp32s2-co2-monitor by gregdavill, with 178 stars.
Can I simulate one of these boards using the W25Q32JVZPIQ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.