5 open source boards using the SN74AVC4T774PWR
Real designs built with the SN74AVC4T774PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
OpenSourcedMiners
Luckst4r
171.1 × 83.1 mm378 parts6LCERN-OHL-S-2.00FPGA
Tangnano9k kr260-hat
calperxd
65 × 56.5 mm168 parts4LCustom license0ESP32
Bitair mainboard
heatbitinc
72.5 × 80.5 mm138 parts4LCERN-OHL-S-2.00Sports-Camera-Analytics-
dawsboss
84 × 52 mm92 parts4LNo license0STM32
Imuicm20948
matatma23-gento
79.4 × 49.4 mm73 parts4LNo license0
How designs wire the SN74AVC4T774PWR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74AVC4T774PWR connects to, and the resistors, capacitors and other passives placed on it.
- The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF).
- The VCCA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF).
- The OE_9 pin has a resistor to GND on 3 of 5 designs, most often 20 kΩ (then 10 kΩ).
- The DIR2 pin is tied to GND on 3 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| DIR2pin 2 | Connected to: GND 60% · 3.3V 20% · a signal 20% | — |
| OE_9pin 9 | Connected to: Signal 100% |
|
| GNDpin 10 | Connected to: GND 100% | — |
| VCCBpin 15 | Connected to: 1.8V 100% |
|
| VCCApin 16 | Connected to: 3.3V 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Tangnano9k kr260-hat by calperxd, Sports-Camera-Analytics- by dawsboss, Bitair mainboard by heatbitinc and OpenSourcedMiners by Luckst4r.
The SN74AVC4T774PWR in open source designs
The gallery holds 5 open source boards using the SN74AVC4T774PWR from 5 GitHub repositories; a typical one measures about 79.4 × 56.5 mm and carries around 138 components.
100% use four copper layers or more, and 40% carry an open source license.
The most starred is OpenSourcedMiners by Luckst4r.
Parts used alongside the SN74AVC4T774PWR
What boards using the SN74AVC4T774PWR are built for
SN74AVC4T774PWR: common questions
Where can I find a SN74AVC4T774PWR reference design?
Each of the 5 boards on this page is a real design using the SN74AVC4T774PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74AVC4T774PWR VCCB pin?
The VCCB pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AVC4T774PWR.
What decoupling capacitors do designs use on the SN74AVC4T774PWR VCCA pin?
The VCCA pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AVC4T774PWR.
What resistor goes on the SN74AVC4T774PWR OE_9 pin?
The OE_9 pin has a resistor to GND on 3 of 5 designs, most often 20 kΩ (then 10 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74AVC4T774PWR.
What parts are used alongside the SN74AVC4T774PWR?
The ESP32-S3-WROOM-1-N16R8, RT9080-33GJ5 and TPS546D24ARVFR appear in the most repositories here.
Which microcontrollers do boards using the SN74AVC4T774PWR use?
Most are built on ESP32 (2), FPGA (1) and STM32 (1).
How big is a typical board using the SN74AVC4T774PWR?
The median is 79.4 × 56.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74AVC4T774PWR?
By GitHub stars, OpenSourcedMiners by Luckst4r, with 0 stars.
Can I simulate one of these boards using the SN74AVC4T774PWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.