16 open source boards using the LM2576HVS-5
Real designs built with the LM2576HVS-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Multistepper
eddyem
113.5 × 105.5 mm234 parts4LNo license208STM32
Jag board
soerenmeier
95 × 56 mm51 parts4LApache-2.02ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT1ESP8266
Control board
MahmoudNasser9
146 × 118.2 mm115 parts2LNo license0ESP32
HoloCade Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LNo license0ESP32
LBEAST Driver Shield
scifiuiguy
118 × 84.5 mm78 parts2LMIT0ESP32
LBEAST Universal Shield
scifiuiguy
118 × 84.5 mm54 parts2LNo license0AVR/Arduino
Rover-PCB-
Sujay-1010
42.2 × 82 mm39 parts2LNo license0AVR/Arduino
Hakko-907-Clone soldering station
AUsualNoob
99 × 81.5 mm24 parts4LMIT0STM32
Nitrogen
eddyem
80 × 80 mm136 parts4LNo license208ESP32
HoloCade Universal Shield
scifiuiguy
118 × 84.5 mm71 parts2LMIT1ESP32
LBEAST Universal Shield
scifiuiguy
118 × 84.5 mm71 parts2LMIT0ESP32
HoloCade Universal Shield
scifiuiguy
118 × 84.5 mm71 parts2LNo license0Power
imihajlow
53 × 91 mm32 parts2LNo license1Carte Alim
Pokibot-org
98.4 × 66 mm32 parts2LApache-2.00- schematic only · 234 partsSTM32
Fx3u 24mr
eddyem
234 parts2LNo license208
How designs wire the LM2576HVS-5
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the LM2576HVS-5 connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 µF).
- The OUT pin has a inductor on 6 of 11 designs, most often 100 µH (then 68 µH).
- The OUT pin has a capacitor to GND on 5 of 11 designs, most often 10 µF (then 47 µF).
- The ON/OFF pin is tied to GND on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 12V 64% · a signal 27% |
|
| OUTpin 2 | Connected to: Signal 55% · 5V 45% |
|
| GNDpin 3 | Connected to: GND 82% · a signal 18% | — |
| FBpin 4 | Connected to: Signal 60% · 5V 40% |
|
| ON/OFFpin 5 | Connected to: GND 60% · a signal 40% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Multistepper by eddyem, Jag board by soerenmeier, Power by imihajlow and HoloCade Driver Shield by scifiuiguy.
The LM2576HVS-5 in open source designs
The gallery holds 16 open source boards using the LM2576HVS-5 from 11 GitHub repositories; a typical one measures about 118 × 84.5 mm and carries around 71 components.
75% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is Multistepper by eddyem.
Parts used alongside the LM2576HVS-5
Microcontrollers on boards using the LM2576HVS-5
What boards using the LM2576HVS-5 are built for
LM2576HVS-5: common questions
Where can I find a LM2576HVS-5 reference design?
Each of the 16 boards on this page is a real design using the LM2576HVS-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM2576HVS-5 VIN pin?
The VIN pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 11 open source designs using the LM2576HVS-5.
How is the LM2576HVS-5 OUT pin connected?
The OUT pin has a inductor on 6 of 11 designs, most often 100 µH (then 68 µH). Counted from the KiCad layouts of 11 open source designs using the LM2576HVS-5.
How is the LM2576HVS-5 ON/OFF pin connected?
The ON/OFF pin is tied to GND on 6 of 10 designs (a signal on 4). Counted from the KiCad layouts of 11 open source designs using the LM2576HVS-5.
What parts are used alongside the LM2576HVS-5?
The ADM3057ExRW, ESP32-S3-2x22, LAN8720A, AMS1117-3.3 and BTS7960B appear in the most repositories here.
Which microcontrollers do boards using the LM2576HVS-5 use?
Most are built on ESP32 (7), STM32 (4), AVR/Arduino (2) and ESP8266 (1).
How big is a typical board using the LM2576HVS-5?
The median is 118 × 84.5 mm, and 75% are two-layer designs.
What is the most popular open source board using the LM2576HVS-5?
By GitHub stars, Multistepper by eddyem, with 208 stars.
Can I simulate one of these boards using the LM2576HVS-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.