8 open source boards using the TS3A27518E
Real designs built with the TS3A27518E, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Quickstep controller
Govish
192.5 × 165 mm235 parts2LNo license0Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.08Sd mux
emaste
50 × 114 mm48 parts2LApache-2.02Sd mux
3mdeb
50 × 114 mm48 parts2LApache-2.01ESP32
Quickstep controller RevII
Govish
192.5 × 165 mm235 parts2LNo license0Sd mux
capotosto
50 × 114 mm48 parts2LApache-2.00Sd mux
agners
50 × 114 mm48 parts2LApache-2.00Sd mux
moto-timo
50 × 114 mm48 parts2LApache-2.00
How designs wire the TS3A27518E
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TS3A27518E connects to, and the resistors, capacitors and other passives placed on it.
- Pin 8 has a decoupling capacitor on 7 of 7 designs, most often 100 nF.
- Pin 14 has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ.
- Pin 24 has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ.
- Pin 3 is left unconnected on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 3 | Connected to: Not connected 100% | — |
| Pin 5 | Connected to: GND 100% | — |
| Pin 8 | Connected to: 3.3V 100% |
|
| Pin 14 | Connected to: 74AHC1G14 86%, FT245RL 86% |
|
| Pin 20 | Connected to: GND 100% | — |
| Pin 24 | Connected to: 74AHC1G14 86%, FT245RL 86% |
|
18 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sd mux by 3mdeb, Sd mux by emaste, Sd mux by 3mdeb and Sd mux by agners.
The TS3A27518E in open source designs
The gallery holds 8 open source boards using the TS3A27518E from 7 GitHub repositories; a typical one measures about 50 × 114 mm and carries around 48 components.
100% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is Sd mux by 3mdeb.
Parts used alongside the TS3A27518E
Microcontrollers on boards using the TS3A27518E
What boards using the TS3A27518E are built for
TS3A27518E: common questions
Where can I find a TS3A27518E reference design?
Each of the 8 boards on this page is a real design using the TS3A27518E. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TS3A27518E pin 8?
Pin 8 has a decoupling capacitor on 7 of 7 designs, most often 100 nF. Counted from the KiCad layouts of 7 open source designs using the TS3A27518E.
What pull-up resistor is used on the TS3A27518E pin 14?
Pin 14 has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the TS3A27518E.
What pull-up resistor is used on the TS3A27518E pin 24?
Pin 24 has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the TS3A27518E.
What parts are used alongside the TS3A27518E?
The 74AHC1G14, FT245RL and TS3USB30EDGSR appear in the most repositories here.
Which microcontrollers do boards using the TS3A27518E use?
Most are built on ESP32 (2).
How big is a typical board using the TS3A27518E?
The median is 50 × 114 mm, and 100% are two-layer designs.
What is the most popular open source board using the TS3A27518E?
By GitHub stars, Sd mux by 3mdeb, with 8 stars.
Can I simulate one of these boards using the TS3A27518E before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.