ESP32-DEVKIT-S-cp2102
Hasatio·esp32DevKitS·Rev0/ESP32-DEVKIT-S-cp2102.kicad_pcb
About the ESP32-DEVKIT-S-cp2102 PCB
ESP32-DEVKIT-S-cp2102 is an open source ESP32 PCB design by Hasatio, published on GitHub. It is a 2-layer board measuring 28.1 × 43.3 mm, with 78 components from 47 distinct parts.
Its main chip is the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family. Other key parts include the ADXL345, AP2112K-3.3, MCP73831, ADS1115IDGS and CH340K. By type, the board carries 34 resistors, 14 capacitors, 11 ICs, 7 connectors, 4 diodes and 2 transistors.
It belongs with the usb & debug tools designs in this gallery.
From the project
The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM
The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM
This pcb scaled down using the components in the example schematic
- 1x ADXL345 (Accelerometer) - 2x 1x20 FPC connector for ESP pins - In breakable PCB: - 4x ADS1115 (Analog to Digital Converter) - 1x20 FPC connector - 1x QWIIC connector
- ESP32-WROOM-32D model - Battery socket breakable PCB - Logo
Main components on the ESP32-DEVKIT-S-cp2102
ESP32-DEVKIT-S-cp2102 bill of materials (BOM)
78 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADXL345 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U1 |
| 1 | AP2112K-3.3 | SOT23-5 | U2 |
| 1 | MCP73831 >VALUE | ESP-WROOM-32-NARROW | U4 |
| 1 | ADS1115IDGS MCP73831 | SOT23-5 | U5 |
| 1 | ADS1115IDGS | SOT23-5 | U7 |
| 1 | ADS1115IDGS MAX17048 | DFN-8 | U8 |
| 1 | CH340K ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U9 |
| 1 | AP2112K-3.3 ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U10 |
| 1 | MAX17048 ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U11 |
| 1 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U12 |
| 1 | CP2102N-Axx-xQFN24 | QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U14 |
| 1 | DMG2305UX 20V/4.2A/52mΩ/1.4W | SOT23-3 | Q1 |
| 1 | MBT3904DW1T1 | SC70-6 | Q2 |
| 1 | JST_2MM_MALE | JST-2-SMD | J1 |
| 1 | USB_C_2-LAYER_PADS | USB-C-16P-2LAYER-PADS | J2 |
| 3 | CONN_01X20 Conn_01x20 | Molex_200528-0200_1x20-1MP_P1.00mm_Horizontal | J3, J5, J6 |
| 2 | QWIIC_RIGHT_ANGLE | JST04_1MM_RA | J4, J7 |
| 1 | FRAME-LEDGER | CREATIVE_COMMONS | FRAME1 |
| 2 | JUMPER-SMT_2_NC_TRACE_SILK | SMT-JUMPER_2_NC_TRACE_SILK | JP1, JP2 |
| 1 | Boot | TACTILE_SWITCH_SMD_4.6X2.8MM | S1 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Reset | TACTILE_SWITCH_SMD_4.6X2.8MM | S2 |
| 1 | VAL** | mouse-bite-1mm x4 | mouse-bite-1mm-slot |
| 1 | S4 3A/10V/280mV | SOD-323 | D1 |
| 1 | RED | LED-0603 | D2 |
| 1 | Yellow | LED-0603 | D3 |
| 1 | BLUE | LED-0603 | D5 |
| 6 | 1.0UF 1.0uF | 0402-TIGHT | C1, C2, C3, C8, C9, C10 |
| 2 | 10UF 10uF | 0402-TIGHT | C4, C5 |
| 1 | 4.7UF 1.0uF | 0402-TIGHT | C6 |
| 1 | 4.7UF 4.7uF | 0603 | C7 |
| 1 | 0.1UF 4.7uF | 0402-TIGHT | C12 |
| 2 | 0.1uF | 0402-TIGHT | C18, C19 |
| 1 | 1.0uF | 0402-TIGHT | C20 |
| 5 | 10K 10k | 0402-TIGHT | R1, R3, R4, R7, R8 |
| 3 | 4K7 4k7 | 0402-TIGHT | R2, R5, R6 |
| 2 | 1k | 0402-TIGHT | R9, R34 |
| 13 | 150K 150k | 0402-TIGHT | R10, R11, R12, R15, R16, R17, R18, R19 +5 |
| 1 | 150K 10k | 0402-TIGHT | R13 |
| 1 | 150K 1k | 0402-TIGHT | R14 |
| 1 | 150K 2.0k | 0603 | R23 |
| 1 | 10K 150k | 0402-TIGHT | R26 |
| 1 | 150k | 0402-TIGHT | R27 |
| 1 | 2.0K 150k | 0402-TIGHT | R28 |
| 1 | 10k | 0402-TIGHT | R29 |
| 1 | 22k | 0402-TIGHT | R30 |
| 1 | 33k | 0402-TIGHT | R31 |
| 2 | 5.1K 5.1k | 0402-TIGHT | R32, R33 |
ESP32-DEVKIT-S-cp2102 design files
The KiCad project lives in the Hasatio/esp32DevKitS repository on GitHub; these links point at the commit this page was built from.
ESP32-DEVKIT-S-cp2102: common questions
What microcontroller does the ESP32-DEVKIT-S-cp2102 use?
The ESP32-DEVKIT-S-cp2102 is built around the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family.
How big is the ESP32-DEVKIT-S-cp2102 PCB?
The ESP32-DEVKIT-S-cp2102 measures 28.1 × 43.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ESP32-DEVKIT-S-cp2102?
78 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ESP32-DEVKIT-S-cp2102 design files?
From the Hasatio/esp32DevKitS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ESP32-DEVKIT-S-cp2102 design in my own project?
The repository has no license, so all rights stay with Hasatio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ESP32-DEVKIT-S-cp2102 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in esp32DevKitS
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k