Rev0
Hasatio·esp32DevKitS·Rev0/Rev0.kicad_pcb
About the Rev0 PCB
Rev0 is an open source ESP32 PCB design by Hasatio, published on GitHub. It is a 2-layer board measuring 28.1 × 43.3 mm, with 74 components from 31 distinct parts.
Its main chip is the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family. Other key parts include the ADXL345, AP2112K-3.3, >VALUE, MCP73831 and ADS1115IDGS. By type, the board carries 31 resistors, 14 capacitors, 11 ICs, 7 connectors, 4 diodes and 2 transistors.
From the project
The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM
The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM
This pcb scaled down using the components in the example schematic
- 1x ADXL345 (Accelerometer) - 2x 1x20 FPC connector for ESP pins - In breakable PCB: - 4x ADS1115 (Analog to Digital Converter) - 1x20 FPC connector - 1x QWIIC connector
- ESP32-WROOM-32D model - Battery socket breakable PCB - Logo
Main components on the Rev0
Rev0 bill of materials (BOM)
74 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADXL345 | LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y | U1 |
| 2 | AP2112K-3.3 | SOT23-5 | U2, U10 |
| 1 | >VALUE | ESP-WROOM-32-NARROW | U3 |
| 1 | MCP73831 | SOT23-5 | U4 |
| 4 | ADS1115IDGS | TSSOP-10_3x3mm_P0.5mm | U5, U6, U7, U8 |
| 1 | CH340K | SSOP-10_3.9x4.9mm_P1.00mm | U9 |
| 1 | MAX17048 | DFN-8 | U11 |
| 1 | DMG2305UX 20V/4.2A/52mΩ/1.4W | SOT23-3 | Q1 |
| 1 | MBT3904DW1T1 | SC70-6 | Q2 |
| 1 | JST_2MM_MALE | JST-2-SMD | J1 |
| 1 | USB_C_2-LAYER_PADS | USB-C-16P-2LAYER-PADS | J2 |
| 3 | CONN_01X20 Conn_01x20 | Molex_200528-0200_1x20-1MP_P1.00mm_Horizontal | J3, J5, J6 |
| 2 | QWIIC_RIGHT_ANGLE | JST04_1MM_RA | J4, J7 |
| 1 | FRAME-LEDGER | CREATIVE_COMMONS | FRAME1 |
| 2 | JUMPER-SMT_2_NC_TRACE_SILK | SMT-JUMPER_2_NC_TRACE_SILK | JP1, JP2 |
| 1 | Boot | TACTILE_SWITCH_SMD_4.6X2.8MM | S1 |
| 1 | Reset | TACTILE_SWITCH_SMD_4.6X2.8MM | S2 |
| 1 | S4 3A/10V/280mV | SOD-323 | D1 |
| 1 | RED | LED-0603 | D2 |
| 1 | Yellow | LED-0603 | D3 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BLUE | LED-0603 | D5 |
| 8 | 1.0UF 1.0uF | 0402-TIGHT | C1, C2, C3, C8, C9, C10, C11, C14 |
| 2 | 10UF 10uF | 0402-TIGHT | C4, C5 |
| 2 | 4.7UF 4.7uF | 0402-TIGHT | C6, C7 |
| 2 | 0.1UF 0.1uF | 0402-TIGHT | C12, C13 |
| 6 | 10K 10k | 0402-TIGHT | R1, R3, R4, R7, R8, R26 |
| 3 | 4K7 4k7 | 0402-TIGHT | R2, R5, R6 |
| 3 | 1k | 0402-TIGHT | R9, R27, R34 |
| 16 | 150K 150k | 0402-TIGHT | R10, R11, R12, R13, R14, R15, R16, R17 +8 |
| 1 | 2.0K 2.0k | 0402-TIGHT | R28 |
| 2 | 5.1K 5.1k | 0402-TIGHT | R32, R33 |
Rev0 design files
The KiCad project lives in the Hasatio/esp32DevKitS repository on GitHub; these links point at the commit this page was built from.
- LayoutRev0/Rev0.kicad_pcb
- SchematicRev0/Rev0.kicad_sch
- BOMRev0/production/bom.csv
Rev0: common questions
What microcontroller does the Rev0 use?
The Rev0 is built around the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family.
How big is the Rev0 PCB?
The Rev0 measures 28.1 × 43.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Rev0?
74 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rev0 design files?
From the Hasatio/esp32DevKitS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rev0 design in my own project?
The repository has no license, so all rights stay with Hasatio. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rev0 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in esp32DevKitS
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k