L

Hasatio·esp32DevKitS·Rev1/L/L.kicad_pcb

L PCB layout, top view — open source ESP32 board by Hasatio

About the L PCB

L is an open source ESP32 PCB design by Hasatio, published on GitHub. It is a 2-layer board measuring 28.9 × 42.6 mm, with 74 components from 32 distinct parts.

Its main chip is the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family. Other key parts include the ADXL345, AP2112K-3.3, >VALUE, MCP73831 and ADS1115IDGS. By type, the board carries 31 resistors, 14 capacitors, 10 ICs, 7 connectors, 4 diodes and 3 switches.

From the project

The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM

The circuit taken as an example while designing the board Thing Plus C - ESP32 WROOM

This pcb scaled down using the components in the example schematic

- 1x ADXL345 (Accelerometer) - 2x 1x20 FPC connector for ESP pins - In breakable PCB: - 4x ADS1115 (Analog to Digital Converter) - 1x20 FPC connector - 1x QWIIC connector

- ESP32-WROOM-32D model - Battery socket breakable PCB - Logo

Main components on the L

L bill of materials (BOM)

74 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADXL345
U11
1
AP2112K-3.3
U12
1
>VALUE
U13
1
MCP73831
U14
4
ADS1115IDGS
U15, U16, U17, U18
1
CH340C
U19
1
MAX17048
U20
1
DMG2305UX 20V/4.2A/52mΩ/1.4W
Q3
1
MBT3904DW1T1
Q4
1
JST_2MM_MALE
J8
1
USB_C_2-LAYER_PADS
J9
2
QWIIC_RIGHT_ANGLE
J10, J13
3
CONN_01X20
Conn_01x20
J11, J12, J14
1
FRAME-LEDGER
FRAME1
2
JUMPER-SMT_2_NC_TRACE_SILK
JP3, JP4
1
Boot
S3
1
Reset
S4
1
ON/OFF
SW2
1
S4 3A/10V/280mV
D5
1
RED
D6
Show 12 more
QtyPartRefs
1
Yellow
D7
1
BLUE
D8
8
1.0UF
1.0uF
C15, C16, C17, C22, C23, C24, C25, C27
2
10UF
10uF
C18, C19
2
4.7UF
4.7uF
C20, C21
2
0.1UF
0.1uF
C26, C28
6
10K
10k
R32, R34, R35, R38, R39, R57
3
4K7
4k7
R33, R36, R37
3
1k
R40, R58, R62
16
150K
150k
R41, R42, R43, R44, R45, R46, R47, R48 +8
1
2.0K
2.0k
R59
2
5.1K
5.1k
R60, R61

L design files

The KiCad project lives in the Hasatio/esp32DevKitS repository on GitHub; these links point at the commit this page was built from.

L: common questions

What microcontroller does the L use?

The L is built around the DMG2305UX 20V/4.2A/52mΩ/1.4W, from the ESP32 family.

How big is the L PCB?

The L measures 28.9 × 42.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the L?

74 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the L design files?

From the Hasatio/esp32DevKitS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the L design in my own project?

The repository has no license, so all rights stay with Hasatio. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the L without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esp32DevKitS

Similar boards