HardLabs

SensorLEM1

horychen·ProjectEureka·PCBProject_SensorLEM/KiCad_SensorLEM/SensorLEM1.kicad_pcb

SensorLEM1 PCB layout, top view — open source board by horychen
Simulate this board

About the SensorLEM1 PCB

SensorLEM1 is an open source PCB design by horychen, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 111.7 × 25.8 mm, with 79 components from 19 distinct parts.

Other key parts include the ADR423ARZ, LTC6240HV and LA55-P. By type, the board carries 31 capacitors, 16 resistors, 9 test points, 6 modules, 1 IC and 1 connector.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.

ProjectEureka seeks to streamline the intricate design of robot systems, including communication, cable arrangements, and synchronization, by integrating several motor drivers (up to four) with a single microcontroller (DSP2837xD). This can also be utilized as a testing platform for bearingless motor or any other kind of AC motors. For access to example codes, please visit the following link: here for cpu01 code, and here for cpu02 code. Displayed below is an image representing the previous version.

SensorLEM1, from the project README
From the project README

Main components on the SensorLEM1

ADR423ARZLTC6240HVLA55-P

SensorLEM1 bill of materials (BOM)

79 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ADR423ARZ
U1
3
LTC6240HV
A1, A3, A6
3
LA55-P
A2, A4, A5
1
HIF3FC-30PA-2.54DSA(71)
HIF3FC-30PA-2.54DSA
J1
9
0R
RB1, RB2, RB3, RB4, RB5, RB6, RB7, RB8 +1
3
24R 1%精度
RM1, RM2, RM3
3
DNP
RU1, RU2, RU3
9
TP-黄色测试点
TP2, TP3, TP5, TP6, TP7, TP8, TP9, TP10 +1
6
105
C1, C9, C10, C18, C20, C27
9
103
C2, C4, C6, C11, C13, C16, C21, C25 +1
3
101
C3, C12, C23
6
47NF
47nf
C5, C7, C14, C15, C19, C22
3
4.7UF
4.7uF
C8, C17, C24
2
106 25V
C28, C29
2
104
C30, C31
1
DNP
R1
6
20K
20k
R2, R5, R9, R13, R17, R20
6
10K
10k
R3, R7, R10, R14, R18, R21
3
470R
R4, R11, R19

SensorLEM1 design files

The KiCad project lives in the horychen/ProjectEureka repository on GitHub; these links point at the commit this page was built from.

SensorLEM1: common questions

How big is the SensorLEM1 PCB?

The SensorLEM1 measures 111.7 × 25.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SensorLEM1?

79 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SensorLEM1 design files?

From the horychen/ProjectEureka repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the SensorLEM1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which horychen chose for the repository.

More boards in ProjectEureka

Similar boards