HardLabs

Sheet1(原始)

horychen·ProjectEureka·PCBProject_Extension28377dBGA/ExtensionSimple2/sheet1(原始).kicad_pcb

Sheet1(原始) PCB layout, top view — open source board by horychen
Simulate this board

About the Sheet1(原始) PCB

Sheet1(原始) is an open source PCB design by horychen, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 122.2 × 82.1 mm, with 74 components from 28 distinct parts.

Other key parts include the SN74ABT541. By type, the board carries 33 resistors, 12 capacitors, 3 connectors, 3 diodes, 2 ICs and 1 transistor.

It belongs with the robotics & motion and sensors designs in this gallery.

From the project

12 phase motor drive including inverter, microcontroller-mother-board, sensing, communication, DAC, etc.

ProjectEureka seeks to streamline the intricate design of robot systems, including communication, cable arrangements, and synchronization, by integrating several motor drivers (up to four) with a single microcontroller (DSP2837xD). This can also be utilized as a testing platform for bearingless motor or any other kind of AC motors. For access to example codes, please visit the following link: here for cpu01 code, and here for cpu02 code. Displayed below is an image representing the previous version.

Sheet1(原始), from the project README
From the project README

Main components on the Sheet1(原始)

SN74ABT541

Sheet1(原始) bill of materials (BOM)

74 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
SN74ABT541
U1, U2
1
FMMT618TA
Q1
1
CONN_02X05_ODD_EVEN
Conn_02x05_Odd_Even
J1
2
CONN_01X02_PIN
Conn_01x02_Pin
J2, J3
5
CONN_02X04_COUNTER_CLOCKWISE
Conn_02x04_Counter_Clockwise
CAN1, CAN2, SPI2, UART3, UART4
1
CONN_02X02_COUNTER_CLOCKWISE
Conn_02x02_Counter_Clockwise
DI1
1
~
DSP1
2
HIF3FC-20PA-2.54DSA(71)
HIF3FC-20PA-2.54DSA
INC1, SPI1
2
CONN_02X08_TOP_BOTTOM
Conn_02x08_Top_Bottom
IPM1, IPM2
3
HIF3FC-30PA-2.54DSA(71)
HIF3FC-30PA-2.54DSA
LEM1, LEM2, POWER1
1
MCP6024
N1
2
DNP
RU1, RU2
1
0R
RU3
2
Conn_02x04_Counter_Clockwise
UART1, UART2
2
BAR43S
D1, D2
1
LEDRED
D3
5
104
C1, C2, C3, C4, C9
4
102
C5, C6, C7, C8
3
103
C10, C11, C12
12
4.7K
4.7k
R1, R2, R3, R4, R5, R6, R7, R8 +4
Show 8 more
QtyPartRefs
4
0R
R13, R14, R15, R16
9
10K
R17, R18, R19, R20, R27, R28, R29, R32 +1
3
1k
R21, R22, R24
1
100R
R23
1
1.69K/1%
R25
1
3.3K/1%
R26
1
2K
R30
1
301R
R31

Sheet1(原始) design files

The KiCad project lives in the horychen/ProjectEureka repository on GitHub; these links point at the commit this page was built from.

Sheet1(原始): common questions

How big is the Sheet1(原始) PCB?

The Sheet1(原始) measures 122.2 × 82.1 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Sheet1(原始)?

74 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Sheet1(原始) design files?

From the horychen/ProjectEureka repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Sheet1(原始) design in my own project?

Yes, under the terms of its GPL-3.0 license, which horychen chose for the repository.

More boards in ProjectEureka

Similar boards