Isa sdcard

ifilot·slot-otter·pcb/release/isa-sdcard.kicad_pcb

Isa sdcard PCB layout, top view — open source board by ifilot

About the Isa sdcard PCB

Isa sdcard is an open source PCB design by ifilot, published on GitHub. It is a 4-layer board measuring 104.4 × 82.7 mm, with 46 components from 30 distinct parts.

Other key parts include the CY62128ELL-45SXI, 74HC00, 74HC74, 74HC163 and 74HC138. By type, the board carries 15 ICs, 14 capacitors, 10 resistors, 3 diodes, 2 connectors and 1 crystal.

From the project

8-bit ISA card to interface with a FAT32 formatted SD card

An 8-bit ISA card for accessing FAT16- or FAT32-formatted SD cards under MS-DOS.

Slot-otter lets a DOS PC use an SD card as an ordinary drive. Fill the card with files on a modern computer, insert it into your vintage PC, and copy or run them from DOS. A working setup has three parts:

- the Slot-otter card in a free 8-bit ISA slot; - the OTTERSD driver on the PC's hard drive, loaded at startup; - an SD card with a FAT16 or FAT32 file system.

Isa sdcard, from the project README
From the project README

Main components on the Isa sdcard

Isa sdcard bill of materials (BOM)

46 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CY62128ELL-45SXI
74HC00
U1
1
74HC00
74HCT32
U2
1
74HC74
74HCT139
U3
1
74HC00
74HC163
U4
1
74HC163
74HC00
U5
1
74HC138
74HC165
U6
1
74HC123
74HC595
U7
1
74HC273
74HCT688
U8
1
74HC32
74HCT245
U9
1
74HC32
74HC74
U10
1
74HC273
74HC08
U11
1
74HC165
74HC04
U12
1
74HC595
74HC74
U13
1
AMS1117-3.3
U16
1
74LVC125
U21
1
16MHz
X1
1
MICRO_SD_CARD_DET1
Micro_SD_Card_Det1
J1
1
Bus_ISA_8bit_AB_Rev0
J2
1
ADDR SEL
SW1
1
~{CS}
D1
Show 10 more
QtyPartRefs
1
MOSI
D2
1
MISO
D3
12
0.1UF
0.1uF
C1, C2, C3, C4, C5, C6, C8, C9 +4
1
0.1UF
100n
C10
1
100NF
100uF
C23
1
560
10k
R1
1
180
R2
2
10K
180
R3, R4
4
3.3K
3.3k
R8, R9, R10, R11
2
10k
RN1, RN3

Isa sdcard design files

The KiCad project lives in the ifilot/slot-otter repository on GitHub; these links point at the commit this page was built from.

Isa sdcard: common questions

How big is the Isa sdcard PCB?

The Isa sdcard measures 104.4 × 82.7 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Isa sdcard?

46 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Isa sdcard design files?

From the ifilot/slot-otter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Isa sdcard design in my own project?

The repository has no license, so all rights stay with ifilot. Use it as a reference, and ask the author before reusing the design.

More boards in slot-otter