16 open source boards using the 74HC163
Real designs built with the 74HC163, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
6502 ACE Board
acwright
335 × 250 mm183 parts2LCERN-OHL-P-2.012PC-Engine-GT-Controller
Board-Folk
94 × 79.1 mm36 parts2LNo license12Internal sdcard interface
ifilot
219 × 88 mm77 parts2LNo license3Cisc-8
nailed-barnacle
299.7 × 198.1 mm315 parts2LMIT1Isa sdcard
ifilot
104.4 × 82.7 mm46 parts4LNo license1Micro
jurendono
200 × 150 mm175 parts2LNo license0Zak180
agkaminski
188 × 128.3 mm128 parts4LCC-BY-NC-4.00GP8B
JonathSpirit
133 × 93 mm105 parts4LCERN-OHL-W-2.0074xx pdp8 ma md register board
sebsikora
137.2 × 88.9 mm42 parts4LNo license0Philips P2000T SD-CARD SLOT2 cartridge
ifilot
85.1 × 100 mm62 parts4LNo license3Prototype
ifilot
151.6 × 82.7 mm45 parts2LNo license1Cpu blitter inputs
clydeshaffer
177.8 × 152.4 mm145 parts4LNo license146Sdcard prototype
ifilot
82.6 × 67.3 mm34 parts2LNo license374xx pdp8 register board
sebsikora
137.2 × 88.9 mm39 parts4LNo license0LogicBoard tht2
clydeshaffer
177.8 × 152.4 mm143 parts4LNo license14674xx pdp8 pc sr register board
sebsikora
137.2 × 88.9 mm36 parts4LNo license0
How designs wire the 74HC163
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 74HC163 connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 nF).
- The CET pin is tied to VCC on 7 of 10 designs (a signal on 2).
- The TC pin is left unconnected on 7 of 8 designs.
- The PE pin is tied to VCC on 6 of 10 designs (a signal on 4).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 8 | Connected to: GND 80% | — |
| PEpin 9 | Connected to: VCC 60% · a signal 40% | — |
| CETpin 10 | Connected to: VCC 70% · a signal 20% | — |
| TCpin 15 | Connected to: Not connected 88% | — |
| VCCpin 16 | Connected to: VCC 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Cpu blitter inputs by clydeshaffer, 6502 ACE Board by acwright, PC-Engine-GT-Controller by Board-Folk and Internal sdcard interface by ifilot.
The 74HC163 in open source designs
The gallery holds 16 open source boards using the 74HC163 from 10 GitHub repositories; a typical one measures about 144.4 × 91 mm and carries around 70 components.
56% use four copper layers or more, and 19% carry an open source license.
The most starred is Cpu blitter inputs by clydeshaffer.
Parts used alongside the 74HC163
Microcontrollers on boards using the 74HC163
What boards using the 74HC163 are built for
74HC163: common questions
Where can I find a 74HC163 reference design?
Each of the 16 boards on this page is a real design using the 74HC163. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the 74HC163 VCC pin?
The VCC pin has a decoupling capacitor on 6 of 8 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 10 open source designs using the 74HC163.
How is the 74HC163 CET pin connected?
The CET pin is tied to VCC on 7 of 10 designs (a signal on 2). Counted from the KiCad layouts of 10 open source designs using the 74HC163.
How is the 74HC163 TC pin connected?
The TC pin is left unconnected on 7 of 8 designs. Counted from the KiCad layouts of 10 open source designs using the 74HC163.
What parts are used alongside the 74HC163?
The 74HC00, 74HC02, 74HC138, 74HC32 and 74HC74 appear in the most repositories here.
Which microcontrollers do boards using the 74HC163 use?
Most are built on AVR/Arduino (1).
How big is a typical board using the 74HC163?
The median is 144.4 × 91 mm, and 44% are two-layer designs.
What is the most popular open source board using the 74HC163?
By GitHub stars, Cpu blitter inputs by clydeshaffer, with 146 stars.
Can I simulate one of these boards using the 74HC163 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.