Hard-EnvSens

IgorFJensen·Hard-EnvSens·_backup_libs_antigas/Hard-EnvSens.kicad_pcb

Hard-EnvSens PCB layout, top view — open source ESP32 board by IgorFJensen

About the Hard-EnvSens PCB

Hard-EnvSens is an open source ESP32 PCB design by IgorFJensen, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 102 components from 52 distinct parts.

Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the IP5306, VEML7700, DPS368, SGP41-D-R4 and SHT40-AD1B-R2. By type, the board carries 38 capacitors, 23 resistors, 12 ICs, 7 connectors, 6 diodes and 3 switches.

Main components on the Hard-EnvSens

Hard-EnvSens bill of materials (BOM)

102 components, 52 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C6-WROOM-1
U2
1
IP5306
U3
1
VEML7700
VEML7700-TR
U4
1
DPS368
U5
1
SGP41-D-R4
U6
1
SHT40-AD1B-R2
U7
1
AS7341-DLGT
U8
1
TPS79318DBVTG4
U9
1
BMI160
U10
1
TPS22918TDBVRQ1
U11
1
TP4056-42-ESOP8
U12*1
1
SPX3819M5-L-3-3
U13
2
SS8050
Q1, Q2
1
TYPE-C-31-M-12
J1
1
CONN_01X04_SOCKET
Conn_01x04_Socket
J2
1
CONN_02X02_ODD_EVEN
Conn_02x02_Odd_Even
J3
1
CONN_01X04_PIN
Conn_01x04_Pin
J4
1
CONN_02X02_ODD_EVEN
Conn_02x02_Odd_Even
J5
1
CONN_01X02_PIN
Conn_01x02_Pin
J6
1
Conn_01x04_Pin
J7*1
Show 32 more
QtyPartRefs
9
TestPoint
1V8, 3V3, 3V3Sensor1, 5vBoost1, 5vUSB1, Battery1, GND1, RX1 +1
1
ICS-43434
MK1
3
SW_Push
SW1, SW2, SW3
1
SP0503BAHT
D2
2
LED
D3, D4
3
CMS30I30A
D5, D6, D7
1
1UH
1uH
L1
6
10UF
10uF
C1, C4, C13, C22, C28, C29
9
100NF
100nF
C2, C12, C16, C18, C19, C23, C30, C31 +1
5
1UF
1uF
C3, C7, C14, C15, C33
2
10uF
C5, C36*1
2
4.7UF
4.7uF
C6, C24
6
22UF
22uF
C8, C9, C10, C25, C26, C27
2
10NF
10nF
C17, C38
3
0.1UF
0.1uF
C20, C34, C40
1
0.01UF
0.01uF
C21
1
1NF
1nF
C35
1
100UF
100uF
C39
4
10K
10k
R1, R2, R8, R14
1
4.7R
R3
2
4.7K
4.7k
R4, R5
2
12K
12k
R6, R19
1
100K
R7
1
10R
R9
2
5.11K
5.11k
R11, R12
2
1k
R13, R21
1
2R
R15
1
0.5R
R16
3
0R
R17, R18, R30*1
1
100k
R20*1
1
4k
R31*1
1
10k
R32*1

Hard-EnvSens design files

The KiCad project lives in the IgorFJensen/Hard-EnvSens repository on GitHub; these links point at the commit this page was built from.

Hard-EnvSens: common questions

What microcontroller does the Hard-EnvSens use?

The Hard-EnvSens is built around the ESP32-C6-WROOM-1, from the ESP32 family.

How big is the Hard-EnvSens PCB?

The Hard-EnvSens measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Hard-EnvSens?

102 components, from 52 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Hard-EnvSens design files?

From the IgorFJensen/Hard-EnvSens repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Hard-EnvSens design in my own project?

The repository has no license, so all rights stay with IgorFJensen. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Hard-EnvSens without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards