3 open source boards using the TPS22918TDBVRQ1
Real designs built with the TPS22918TDBVRQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Hard-EnvSens
IgorFJensen
60 × 60 mm102 parts2LNo license0ESP32
SNAB
ras-rap
66.5 × 71.5 mm21 parts2LAGPL-3.00STM32
LB-100
avlyubimov
100 × 70 mm99 parts6LCustom license1
The TPS22918TDBVRQ1 in open source designs
The gallery holds 3 open source boards using the TPS22918TDBVRQ1 from 3 GitHub repositories; a typical one measures about 66.5 × 70 mm and carries around 99 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is LB-100 by avlyubimov.
What boards using the TPS22918TDBVRQ1 are built for
TPS22918TDBVRQ1: common questions
Where can I find a TPS22918TDBVRQ1 reference design?
Each of the 3 boards on this page is a real design using the TPS22918TDBVRQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TPS22918TDBVRQ1 use?
Most are built on ESP32 (2) and STM32 (1).
How big is a typical board using the TPS22918TDBVRQ1?
The median is 66.5 × 70 mm, and 67% are two-layer designs.
What is the most popular open source board using the TPS22918TDBVRQ1?
By GitHub stars, LB-100 by avlyubimov, with 1 stars.
Can I simulate one of these boards using the TPS22918TDBVRQ1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.