HardLabs

Stargazer Camera Board

ISSUIUC·ISS-PCB·boards/CAM-MK1/SG_CAM.kicad_pcb

Stargazer Camera Board layout, top view — open source RP2040/RP2350 board by ISSUIUC
Simulate this board

About the Stargazer Camera Board

Stargazer Camera Board is an open source RP2040/RP2350 PCB design by ISSUIUC, published on GitHub. It is a 2-layer board measuring 40 × 60 mm, with 110 components from 54 distinct parts.

Its main chip is the W25Q128JVSIM, from the RP2040/RP2350 family. Other key parts include the ECMF02-2AMX6, MCP2518FDT-xSL, TPS2121, TCAN337G and STUSB4500QTR. By type, the board carries 39 resistors, 34 capacitors, 12 connectors, 9 ICs, 8 diodes and 2 transistors.

It belongs with the sensors designs in this gallery.

From the project

Building custom flight computers

Archive: Moved to the Archive repo... check it out! 😁 Boards: Contains all of the present boards the team is working on Docs: Contains various documents pertaining to PCB designs Libs: Contains various templates, symbols and footprints that we use when designing PCBs * Scripts: Contains various codes used in PCB development

When you commit changes to the repository, they will generally be found in the Boards folder.

Main components on the Stargazer Camera Board

ECMF02-2AMX6MCP2518FDT-xSLTPS2121TCAN337GSTUSB4500QTRTI_TPS56637W25Q128JVSIMRP2040

Stargazer Camera Board bill of materials (BOM)

110 components, 54 distinct parts.

QtyPartRefs
1
ECMF02-2AMX6
U101
1
MCP2518FDT-xSL
U102
1
TPS2121
U103
1
TCAN337G
U104
1
STUSB4500QTR
U105
2
TI_TPS56637
U106, U107
1
W25Q128JVSIM
U108
1
RP2040
U109
1
DMP3085LSS
Q101
1
DMNH6022SSDQ
Q102
1
40MHz
Y101
1
12.000MHZ-B4-T
Y102
1
USB4105-GF-A
J101
2
TestPoint
J102, J107
3
2157601002
J103, J106, J109
2
2157601003
J104, J110
2
2157601004
J105, J108
1
Conn_01x03
J111
1
RESET PIN
J112
1
Buzzer
BZ101
Show 34 more
QtyPartRefs
1
SW_PUSH_RESET
SW101
4
D
D101, D103, D104, D105
1
RED LED
D106
1
ORANGE LED
D107
1
GREEN LED
D108
1
BLUE LED
D109
1
2.2uH
L101
1
5.6uH
L102
2
22pF
C101, C102
4
0.1uF
C103, C105, C113, C127
5
1uF
C104, C106, C107, C108, C129
2
15uF
C109, C110
12
100nF
C111, C112, C114, C115, C120, C126, C128, C130 +4
2
100pF
C116, C117
2
27pF
C118, C119
3
10uF
C121, C123, C125
2
22uF
C122, C124
1
30k
R101
6
10k
R102, R106, R111, R124, R128, R130
6
100k
R103, R107, R112, R117, R119, R120
2
5.1k
R104, R108
1
47k
R105
1
0
R109
4
1k
R110, R116, R121, R131
1
18.7k
R113
1
120
R114
1
22k
R115
1
100
R118
4
2.2k
R122, R123, R134, R135
2
20k
R125, R126
1
45.3k
R127
1
140k
R129
2
27.4
R132, R133
4
470
R136, R137, R138, R139

Stargazer Camera Board design files

The KiCad project lives in the ISSUIUC/ISS-PCB repository on GitHub; these links point at the commit this page was built from.

Stargazer Camera Board: common questions

What microcontroller does the Stargazer Camera Board use?

The Stargazer Camera Board is built around the W25Q128JVSIM, from the RP2040/RP2350 family.

How big is the Stargazer Camera Board?

The Stargazer Camera Board measures 40 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stargazer Camera Board?

110 components, from 54 distinct parts. The full bill of materials is listed on this page.

Where can I download the Stargazer Camera Board design files?

From the ISSUIUC/ISS-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Stargazer Camera Board design in my own project?

The repository has no license, so all rights stay with ISSUIUC. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stargazer Camera Board without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ISS-PCB

Similar boards