ESP32IoTPlatform

jkordek1·ESP32IoTPlatform·KiCadFiles/ESP32IoTPlatform.kicad_pcb

ESP32IoTPlatform PCB layout, top view — open source ESP32 board by jkordek1

About the ESP32IoTPlatform PCB

ESP32IoTPlatform is an open source ESP32 PCB design by jkordek1, published on GitHub. It is a 2-layer board measuring 190 × 105.2 mm, with 115 components from 58 distinct parts.

Its main chip is the ME6211C33M5G, from the ESP32 family. Other key parts include the ESP32-WROOM-32D, CP2104, TP4054, BME280 and MPU-6050. By type, the board carries 32 resistors, 19 capacitors, 17 switches, 12 connectors, 12 diodes and 8 ICs.

It belongs with the iot & wireless, sensors and displays & leds designs in this gallery.

From the project

Educational IoT platform based on ESP32 microcontroller

ESP32IoTPlatform, from the project README
From the project README

Main components on the ESP32IoTPlatform

ESP32IoTPlatform bill of materials (BOM)

115 components, 58 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ME6211C33M5G
IC1
1
ESP32-WROOM-32D
U1
1
CP2104
U2
1
TP4054
U3
1
BME280
U4
1
MPU-6050
U5
1
PC817
U6
1
L80-M39
U7
2
CJ2301
Q1, Q8
1
S8050G
Q2
1
IRLZ44N
Q3
2
SI2302DS
Q4, Q5
1
Q_DUAL_NPN_UMH3N
Q6
1
Q_DUAL_PNP_BCM857BS
Q7
1
USB_B_Micro
J1
1
SCREW_TERMINAL_01X03
Screw_Terminal_01x03
J2
2
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J3, J4
1
CONN_01X04_FEMALE
Conn_01x04_Female
J5
1
OLED
J6
1
CONN_01X05_FEMALE
Conn_01x05_Female
J7
Show 38 more
QtyPartRefs
1
CONN_01X05_MALE
Conn_01x05_Male
J8
2
CONN_01X11_FEMALE
Conn_01x11_Female
J9, J10
2
CONN_01X11_MALE
Conn_01x11_Male
J11, J12
1
Buzzer
BZ1
1
JST2.0
JST1
1
SANYOU_SRD_Form_C
K1
1
10K
10k
RV1
1
MICROSD-MOLEX-473521001
microSD-MOLEX-473521001
SD1
1
SW_Push
SW1
5
SW_X02
SW_x02
SW2, SW3, SW4, SW9, SW10
8
SW_X01
SW_x01
SW5, SW6, SW7, SW8, SW14, SW15, SW16, SW18
1
SW_X03
SW_x03
SW11
1
SW_X05
SW_x05
SW17
1
SW_X04
SW_x04
SW19
1
SKRHABE010
T1
1
Touchpad
TP1
2
Green
D1, D13
2
Red
D2, D10
1
Orange
D3
1
B5819WS
D4
3
WS2812B
D5, D6, D7
1
Blue
D9
2
S1BB-13-F
D11, D12
9
100N/50V
100n/50V
C1, C4, C8, C9, C12, C15, C16, C17 +1
3
1U/50V
1u/50V
C2, C13, C14
1
1500U
1500u
C3
4
10U/16V
10u/16V
C5, C6, C7, C20
1
10N/6.3V
10n/6.3V
C10
1
2200P/50V
2200p/50V
C11
11
10K
10k
R1, R6, R7, R8, R9, R10, R14, R17 +3
5
330
R2, R3, R11, R31, R32
2
243
R4, R21
6
2k
R5, R22, R23, R24, R25, R26
3
1k
R12, R13, R15
1
1K5
1k5
R16
2
470
R18, R30
1
LDR
R19
1
47K
47k
R28

ESP32IoTPlatform design files

The KiCad project lives in the jkordek1/ESP32IoTPlatform repository on GitHub; these links point at the commit this page was built from.

ESP32IoTPlatform: common questions

What microcontroller does the ESP32IoTPlatform use?

The ESP32IoTPlatform is built around the ME6211C33M5G, from the ESP32 family.

How big is the ESP32IoTPlatform PCB?

The ESP32IoTPlatform measures 190 × 105.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32IoTPlatform?

115 components, from 58 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the ESP32IoTPlatform design files?

From the jkordek1/ESP32IoTPlatform repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the ESP32IoTPlatform design in my own project?

The repository has no license, so all rights stay with jkordek1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32IoTPlatform without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards