Esp32-pluto sdr portable
levirbl·esp32-pluto-sdr-portable·hardware/kicad/placa.kicad_pcb
About the Esp32-pluto sdr portable PCB
Esp32-pluto sdr portable is an open source ESP32 PCB design by levirbl, published on GitHub. It is a 4-layer board measuring 58 × 150 mm, with 150 components from 72 distinct parts.
Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the USBLC6-2SC6, BQ24074RGTR, DW01A, TPS61088RHLR and TPS259470ARPWR. By type, the board carries 55 resistors, 47 capacitors, 12 ICs, 8 transistors, 8 connectors and 7 jumpers.
It belongs with the rf & radio, audio and power & battery designs in this gallery.
From the project
Portable SDR: ESP32-S3 + Pluto SDR handheld receiver (70 MHz–6 GHz) with decoders, radio astronomy and amateur TX
The main board of the portable SDR. It carries the battery, its charger and protection, the 5 V boost converter, the ESP32-S3 with the display, microSD, audio and controls, and it powers the Pluto SDR. The Pluto stays a separate module, mounted behind the board and connected by one short USB-C cable for both data and power.
Designed in KiCad 10, 4 layers, about 58 × 150 mm, built for JLCPCB (assembly files included).

Main components on the Esp32-pluto sdr portable
Esp32-pluto sdr portable bill of materials (BOM)
150 components, 72 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | USBLC6-2SC6 | SOT-23-6 | U1, U6 |
| 1 | BQ24074RGTR | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias | U2 |
| 1 | DW01A | SOT-23-6 | U3 |
| 1 | TPS61088RHLR | Texas_VQFN-RHL-20_ThermalVias | U4 |
| 1 | TPS259470ARPWR | TI_RPW0010A | U5 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U7 |
| 1 | ESP32-S3-WROOM-1U-N16R8 | ESP32-S3-WROOM-1U | U101 |
| 1 | CH340C | SOIC-16_3.9x9.9mm_P1.27mm | U102 |
| 1 | XC6206P332MR | SOT-23-3 | U103 |
| 1 | MAX98357AETE+T | TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm | U104 |
| 1 | ICS-43434 | InvenSense_ICS-43434-6_3.5x2.65mm | U105 |
| 2 | 8205A | TSSOP-8_4.4x3mm_P0.65mm | Q1, Q2 |
| 1 | CSD25402Q3A | VSON-8_3.3x3.3mm_P0.65mm_NexFET | Q3 |
| 1 | 8205A (opcional) | TSSOP-8_4.4x3mm_P0.65mm | Q4 |
| 3 | MMBT3904 | SOT-23 | Q101, Q102, Q104 |
| 1 | AO3401A | SOT-23 | Q103 |
| 1 | C165948 USB-C carga/gravar | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | C165948 USB-C PLUTO (host) | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | BATERIA 1:+ 2:- | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | TFT 3.5in 14P | PinSocket_1x14_P2.54mm_Vertical | J101 |
Show 52 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C585350 microSD Molex 104031-0811 | microSD_HC_Molex_104031-0811 | J102 |
| 1 | C295747 ALTO-FALANTE | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J103 |
| 1 | PTT | PinHeader_1x02_P2.54mm_Vertical | J104 |
| 1 | EXPANSAO | PinHeader_1x04_P2.54mm_Vertical | J106 |
| 1 | C183154 7A | Fuse_1206_3216Metric | F1 |
| 1 | MODE aberto=PFM fechado=PWM | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 3 | medir corrente | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP2, JP3, JP4 |
| 1 | TFT em 3,3 V | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP101 |
| 1 | TFT em 5 V (abrir o JP101) | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP102 |
| 1 | V3 = VCC (CH340C a 3,3 V) | SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP103 |
| 1 | C221841 LIGA/DESLIGA | SW_SPDT_PCM12 | SW1 |
| 1 | C318889 BOOT | SW_Push_1P1T_XKB_TS-1187A | SW101 |
| 1 | C318889 RESET | SW_Push_1P1T_XKB_TS-1187A | SW102 |
| 1 | PEC11R-4015F-S0024 | RotaryEncoder_Bourns_PEC11R-4xxxF-S | SW103 |
| 1 | C2286 vermelho CARGA | LED_0603_1608Metric | D1 |
| 1 | C12624 verde TOMADA | LED_0603_1608Metric | D2 |
| 1 | C2661688 6A 75R@100MHz | L_1206_3216Metric | FB1 |
| 4 | C139197 3A 120R@100MHz | L_1206_3216Metric | FB2, FB3, FB101, FB102 |
| 1 | C408355 1.0uH MWSA0503S | L_Sunlord_MWSA0503S | L1 |
| 1 | C1779 4.7uF 25V | C_0805_2012Metric | C1 |
| 6 | C90146 22uF 16V | C_1206_3216Metric | C2, C13, C14, C15, C26, C101 |
| 8 | C15850 10uF 25V | C_0805_2012Metric | C3, C5, C6, C20, C25, C108, C110, C112 |
| 16 | 100NF 100nF | C_0603_1608Metric | C4, C7, C8, C16, C19, C21, C23, C27 +8 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C9 |
| 1 | 47NF 47nF | C_0603_1608Metric | C10 |
| 1 | 3.9NF 3.9nF | C_0603_1608Metric | C11 |
| 1 | DNP 10pF | C_0603_1608Metric | C12 |
| 3 | C23742 100uF 10V | C_1210_3225Metric | C17, C18, C22 |
| 1 | 22NF 22nF | C_0603_1608Metric | C24 |
| 3 | 1UF 1uF | C_0603_1608Metric | C104, C106, C107 |
| 2 | 1NF 1nF | C_0603_1608Metric | C114, C115 |
| 3 | DNP 10nF | C_0603_1608Metric | C116, C117, C118 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
| 14 | 10K 10k | R_0603_1608Metric | R3, R6, R101, R102, R105, R106, R109, R114 +6 |
| 1 | C137780 1.1k 1% | R_0603_1608Metric | R4 |
| 1 | C21190 1k 1% | R_0603_1608Metric | R5 |
| 2 | 1.5K 1.5k | R_0603_1608Metric | R7, R8 |
| 9 | 100 | R_0603_1608Metric | R9, R107, R108, R112, R113, R117, R118, R119 +1 |
| 3 | 1k | R_0603_1608Metric | R10, R110, R127 |
| 5 | 100K 100k | R_0603_1608Metric | R11, R13, R120, R128, R129 |
| 1 | C22807 150k 1% | R_0603_1608Metric | R12 |
| 2 | C22827 180k 1% | R_0603_1608Metric | R14, R15 |
| 3 | C23206 56k 1% | R_0603_1608Metric | R16, R18, R25 |
| 2 | C4184 20k 1% | R_0603_1608Metric | R17, R19 |
| 1 | C22767 1.3k 1% | R_0603_1608Metric | R20 |
| 2 | 56K 56k | R_0603_1608Metric | R21, R22 |
| 1 | C23024 300k 1% | R_0603_1608Metric | R23 |
| 1 | C25803 100k 1% | R_0603_1608Metric | R24 |
| 1 | C22809 15k 1% | R_0603_1608Metric | R26 |
| 2 | 470 | R_0603_1608Metric | R103, R104 |
| 1 | DNP 0 | R_0603_1608Metric | R111 |
| 1 | DNP 100k | R_0603_1608Metric | R121 |
Esp32-pluto sdr portable design files
The KiCad project lives in the levirbl/esp32-pluto-sdr-portable repository on GitHub; these links point at the commit this page was built from.
Esp32-pluto sdr portable: common questions
What microcontroller does the Esp32-pluto sdr portable use?
The Esp32-pluto sdr portable is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.
How big is the Esp32-pluto sdr portable PCB?
The Esp32-pluto sdr portable measures 58 × 150 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32-pluto sdr portable?
150 components, from 72 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32-pluto sdr portable design files?
From the levirbl/esp32-pluto-sdr-portable repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32-pluto sdr portable design in my own project?
The repository has no license, so all rights stay with levirbl. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Esp32-pluto sdr portable without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k