11 open source boards using the AP111733
Real designs built with the AP111733, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Omega dock new
valerionew
42.9 × 26.4 mm18 parts2LCC-BY-SA-4.037AVR/Arduino
Videopaccart
bwack
99.6 × 101.5 mm23 parts2LNo license6ESP8266
Domonode2
NdK73
95 × 139.6 mm103 parts2LMIT5BENOTL
eacandelas
93.3 × 102.6 mm59 parts2LApache-2.03Nixiesp16
laurivosandi
110.5 × 50.8 mm22 parts2LNo license3AVR/Arduino
Videopaccart backup
bwack
62.2 × 84.5 mm21 parts2LNo license6Uameter
dimka-rs
20.3 × 30.5 mm11 parts2LGPL-3.00STM32
Feeder Testplatine
Tynogc
40 × 64 mm48 parts2LGPL-3.01ESP8266
DomoDisp
chipsi007
100 × 85 mm20 parts2LMIT0ESP8266
DomoDisp
NdK73
100 × 85 mm20 parts2LMIT5AVR/Arduino
MySensors Gateway
LudovicLemarinel
64 × 34 mm15 parts2LNo license4
How designs wire the AP111733
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the AP111733 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 1 is tied to GND on 9 of 9 designs.
- Pin 2 is tied to 3.3V on 9 of 9 designs.
- Pin 4 is tied to 3.3V on 9 of 9 designs.
- Pin 3 is tied to 5V on 7 of 9 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: 3.3V 100% |
|
| Pin 3 | Connected to: 5V 78% · a signal 22% |
|
| Pin 4 | Connected to: 3.3V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Omega dock new by valerionew, Videopaccart by bwack, DomoDisp by NdK73 and MySensors Gateway by LudovicLemarinel.
The AP111733 in open source designs
The gallery holds 11 open source boards using the AP111733 from 9 GitHub repositories; a typical one measures about 93.3 × 84.5 mm and carries around 21 components.
100% are two-layer designs, the rest use four layers or more, and 64% carry an open source license.
The most starred is Omega dock new by valerionew.
Microcontrollers on boards using the AP111733
What boards using the AP111733 are built for
AP111733: common questions
Where can I find a AP111733 reference design?
Each of the 11 boards on this page is a real design using the AP111733. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the AP111733 pin 1 connected?
Pin 1 is tied to GND on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the AP111733.
How is the AP111733 pin 2 connected?
Pin 2 is tied to 3.3V on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the AP111733.
How is the AP111733 pin 4 connected?
Pin 4 is tied to 3.3V on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the AP111733.
Which microcontrollers do boards using the AP111733 use?
Most are built on AVR/Arduino (3), ESP8266 (3) and STM32 (1).
How big is a typical board using the AP111733?
The median is 93.3 × 84.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the AP111733?
By GitHub stars, Omega dock new by valerionew, with 37 stars.
Can I simulate one of these boards using the AP111733 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.