OpenDynKVM
naibaf7·OpenDynKVM·hardware/kvm.kicad_pcb
About the OpenDynKVM PCB
OpenDynKVM is an open source ESP32 PCB design by naibaf7, published on GitHub. It is a 4-layer board measuring 120 × 80 mm, with 252 components from 47 distinct parts.
Its main chip is the ESP32-C3-MINI-1-H4X, from the ESP32 family. Other key parts include the USBLC6-2SC6, LM66200DRLR, TPS2121RUXR, TLV62569DBVR and TLV73311PDBVR. By type, the board carries 112 capacitors, 88 resistors, 25 ICs, 12 diodes, 6 crystals and 6 connectors.
It belongs with the keyboards designs in this gallery.
From the project
A professional and gaming grade open source KVM.
KiCad 10 project for the OpenDynKVM described in ../design.md. Every KiCad file here is generated: edit the generator scripts in tools/, not the schematic or board in eeschema / pcbnew.
Checks that run on kvm.kicadpcb: tools/checkspacing.py (courtyards, pad gaps, board edges), tools/checkaux.py (every auxiliary passive sits on the side of the chip pin it serves), tools/checkcopper.py (copper conflicts, independent of the DRC: clearance between nets on tracks and vias, dead-end stubs, copper that reaches the same point twice (a doubled route), and per differential pair the line-to-line gap…
Main components on the OpenDynKVM
OpenDynKVM bill of materials (BOM)
252 components, 47 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | USBLC6-2SC6 | SOT-23-6 | U101, U201, U301, U1201, U1301, U1401 |
| 1 | LM66200DRLR LM66200 | SOT-583-8 | U401 |
| 1 | TPS2121RUXR TPS2121 | TI_RUX0012A_VQFN-HR-12_2x2.5mm_P0.5mm | U402 |
| 1 | TLV62569DBVR TLV62569 | SOT-23-5 | U403 |
| 1 | TLV73311PDBVR TLV73311 | SOT-23-5 | U404 |
| 1 | RP2354B | QFN-80-1EP_10x10mm_P0.4mm_EP3.4x3.4mm | U501 |
| 4 | TS3USB3031RMGR TS3USB3031 | Texas_RMG0012A_WQFN-12_1.8x1.8mm_P0.4mm | U601, U1202, U1302, U1402 |
| 3 | USB2514B-AEZC-TR USB2514B | QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm | U701, U801, U901 |
| 2 | AT32F405CCT7 | LQFP-48_7x7mm_P0.5mm | U1001, U1101 |
| 3 | TPS2553DBVR TPS2553 | SOT-23-6 | U1203, U1303, U1403 |
| 1 | SN74AHCT1G125DBVR 74AHCT1G125 | SOT-23-5 | U1501 |
| 1 | ESP32-C3-MINI-1-H4X ESP32-C3-MINI-1 | ESP32-C3-MINI-1 | U1601 |
| 3 | ABM8-272-T3 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y501, Y1001, Y1101 |
| 3 | X322524MOB4SI 24MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y701, Y801, Y901 |
| 3 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12_Edge | J101, J201, J301 |
| 1 | 676430910 USB-A Keyboard | USB_A_Molex_67643_Horizontal | J1201 |
| 1 | 676430910 USB-A Mouse | USB_A_Molex_67643_Horizontal | J1301 |
| 1 | 676430910 USB-A Other | USB_A_Molex_67643_Horizontal | J1401 |
| 1 | TS-1187A-B-A-B BOOTSEL | SW_Push_1P1T_XKB_TS-1187A | SW501 |
| 1 | CPG151101S11-2 MX key | SW_MX_Hotswap_Kailh_1u | SW1501 |
Show 27 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | PESD5V0S2BT,215 PESD5V0S2BT | SOT-23 | D101, D201, D301 |
| 3 | SMF5.0A | D_SOD-123F | D102, D202, D302 |
| 1 | SK6812MINI-E | LED_SK6812MINI-E_3.2x2.8mm_P1.5mm_ReverseMount | D1501 |
| 1 | SK6812SIDE-A LED PC1 | LED_SK6812SIDE-A_4.0x1.6mm | D1502 |
| 1 | SK6812SIDE-A LED KB | LED_SK6812SIDE-A_4.0x1.6mm | D1503 |
| 1 | SK6812SIDE-A LED MS | LED_SK6812SIDE-A_4.0x1.6mm | D1504 |
| 1 | SK6812SIDE-A LED OT | LED_SK6812SIDE-A_4.0x1.6mm | D1505 |
| 1 | SK6812SIDE-A LED PC2 | LED_SK6812SIDE-A_4.0x1.6mm | D1506 |
| 1 | SWPA3015S2R2MT 2.2uH | L_Sunlord_SWPA3015S | L401 |
| 16 | CL05A105KA5NQNC 1uF | C_0402_1005Metric | C101, C201, C301, C401, C402, C403, C404, C405 +8 |
| 67 | CL05B104KO5NNNC 100nF | C_0402_1005Metric | C406, C409, C501, C502, C503, C504, C505, C506 +59 |
| 4 | CL21A226MAQNNNE 22uF | C_0805_2012Metric | C407, C408, C411, C412 |
| 3 | CL10A106KP8NNNC 10uF | C_0603_1608Metric | C410, C512, C1601 |
| 4 | MA10V220M6X8 220uF | CP_Elec_6.3x7.7 | C415, C1203, C1303, C1403 |
| 6 | CL05A475MP5NRNC 4.7uF | C_0402_1005Metric | C516, C707, C807, C907, C1005, C1105 |
| 6 | 0402CG150J500NT 15pF | C_0402_1005Metric | C517, C518, C1007, C1008, C1107, C1108 |
| 6 | 0402CG180J500NT 18pF | C_0402_1005Metric | C710, C711, C810, C811, C910, C911 |
| 7 | 0402WGF5101TCE 5.1k | R_0402_1005Metric | R101, R102, R201, R202, R301, R302, R1604 |
| 21 | 0402WGF1003TCE 100k | R_0402_1005Metric | R103, R104, R203, R204, R303, R403, R405, R509 +13 |
| 4 | 0402WGF4702TCE 47k | R_0402_1005Metric | R304, R404, R409, R411 |
| 5 | 0402WGF2202TCE 22k | R_0402_1005Metric | R401, R406, R1203, R1303, R1403 |
| 37 | 0402WGF1002TCE 10k | R_0402_1005Metric | R402, R410, R412, R505, R507, R508, R510, R511 +29 |
| 1 | 0402WGF3302TCE 33k | R_0402_1005Metric | R407 |
| 6 | 0402WGF1202TCE 12k | R_0402_1005Metric | R408, R701, R801, R901, R1002, R1102 |
| 2 | 0402WGF330JTCE 33R | R_0402_1005Metric | R501, R1501 |
| 3 | 0402WGF1001TCE 1k | R_0402_1005Metric | R502, R506, R1605 |
| 2 | 0402WGF270JTCE 27R | R_0402_1005Metric | R503, R504 |
OpenDynKVM design files
The KiCad project lives in the naibaf7/OpenDynKVM repository on GitHub; these links point at the commit this page was built from.
- Layouthardware/kvm.kicad_pcb
- Schematichardware/kvm.kicad_sch
- BOMhardware/bom/jlcpcb_bom.csv
OpenDynKVM: common questions
What microcontroller does the OpenDynKVM use?
The OpenDynKVM is built around the ESP32-C3-MINI-1-H4X, from the ESP32 family.
How big is the OpenDynKVM PCB?
The OpenDynKVM measures 120 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the OpenDynKVM?
252 components, from 47 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenDynKVM design files?
From the naibaf7/OpenDynKVM repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OpenDynKVM design in my own project?
The repository has no license, so all rights stay with naibaf7. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the OpenDynKVM without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k