3 open source boards using the USB2514B-AEZC-TR
Real designs built with the USB2514B-AEZC-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Raspberry Pi
Mesh radio-Halow-LoRa
ties1887
76 × 56 mm112 parts6LCC-BY-NC-4.039ESP32
CopterCat cm4
matveylapin
40 × 55 mm156 parts4LApache-2.03Benchswitch usb dut hub
saikhamhein
95 × 80 mm131 parts4LNo license0
The USB2514B-AEZC-TR in open source designs
The gallery holds 3 open source boards using the USB2514B-AEZC-TR from 3 GitHub repositories; a typical one measures about 76 × 56 mm and carries around 131 components.
100% use four copper layers or more, and 33% carry an open source license.
The most starred is Mesh radio-Halow-LoRa by ties1887.
Microcontrollers on boards using the USB2514B-AEZC-TR
What boards using the USB2514B-AEZC-TR are built for
USB2514B-AEZC-TR: common questions
Where can I find a USB2514B-AEZC-TR reference design?
Each of the 3 boards on this page is a real design using the USB2514B-AEZC-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the USB2514B-AEZC-TR use?
Most are built on ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the USB2514B-AEZC-TR?
The median is 76 × 56 mm, and 0% are two-layer designs.
What is the most popular open source board using the USB2514B-AEZC-TR?
By GitHub stars, Mesh radio-Halow-LoRa by ties1887, with 39 stars.
Can I simulate one of these boards using the USB2514B-AEZC-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.