5 open source boards using the DMG3415U-7

Real designs built with the DMG3415U-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

The DMG3415U-7 in open source designs

The gallery holds 5 open source boards using the DMG3415U-7 from 4 GitHub repositories; a typical one measures about 59.7 × 58.9 mm and carries around 89 components.

100% use four copper layers or more, and 20% carry an open source license.

The most starred is IcyBlue by Oak-Development-Technologies.

Microcontrollers on boards using the DMG3415U-7

What boards using the DMG3415U-7 are built for

DMG3415U-7: common questions

Where can I find a DMG3415U-7 reference design?

Each of the 5 boards on this page is a real design using the DMG3415U-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the DMG3415U-7?

The 24AA32AF-I/MS, MCP73831-2-OT, SX1262IMLTRT, USBLC6-2SC6 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the DMG3415U-7 use?

Most are built on ESP32 (3), FPGA (1) and RP2040/RP2350 (1).

How big is a typical board using the DMG3415U-7?

The median is 59.7 × 58.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the DMG3415U-7?

By GitHub stars, IcyBlue by Oak-Development-Technologies, with 4 stars.

Can I simulate one of these boards using the DMG3415U-7 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part