3 open source boards using the 24AA32AF-I/MS

Real designs built with the 24AA32AF-I/MS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 24AA32AF-I/MS in open source designs

The gallery holds 3 open source boards using the 24AA32AF-I/MS from 2 GitHub repositories; a typical one measures about 59.7 × 58.9 mm and carries around 89 components.

100% use four copper layers or more, and 0% carry an open source license.

The most starred is Stm32h7 by nickzentmayer.

Microcontrollers on boards using the 24AA32AF-I/MS

What boards using the 24AA32AF-I/MS are built for

24AA32AF-I/MS: common questions

Where can I find a 24AA32AF-I/MS reference design?

Each of the 3 boards on this page is a real design using the 24AA32AF-I/MS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 24AA32AF-I/MS?

The DMG3415U-7, MCP73831-2-OT, SX1262IMLTRT, USBLC6-2SC6 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the 24AA32AF-I/MS use?

Most are built on ESP32 (3).

How big is a typical board using the 24AA32AF-I/MS?

The median is 59.7 × 58.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the 24AA32AF-I/MS?

By GitHub stars, Stm32h7 by nickzentmayer, with 1 stars.

Can I simulate one of these boards using the 24AA32AF-I/MS before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part