Backup pre fix16
puji4810·coffe-scale·pcb/s3.1/backup-pre-fix16.kicad_pcb
About the Backup pre fix16 PCB
Backup pre fix16 is an open source ESP32 PCB design by puji4810, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 55 mm, with 78 components from 39 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the NAU7802SGI, LIS2DW12, TMP102, TP4057-42 and XC6220B331MR-G. By type, the board carries 31 resistors, 27 capacitors, 8 ICs, 7 connectors, 2 transistors and 2 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
1. 独立咖啡秤——沿用 scale-adc-s3 的全部功能:称重前端、SPI LCD、 双按键、蜂鸣器、USB-C 供电 / 单节锂电充放电、温度与倾斜传感。 2. 自动手冲机控制器——同一块板通过 J10 扩展口驱动独立的 电源/电机板(水泵、加热、流量/温度传感、喷嘴运动)。高压与功率 驱动电路留在功率板上,本板只做控制。
1. 独立咖啡秤——沿用 scale-adc-s3 的全部功能:称重前端、SPI LCD、 双按键、蜂鸣器、USB-C 供电 / 单节锂电充放电、温度与倾斜传感。 2. 自动手冲机控制器——同一块板通过 J10 扩展口驱动独立的 电源/电机板(水泵、加热、流量/温度传感、喷嘴运动)。高压与功率 驱动电路留在功率板上,本板只做控制。
- 130×30×22 mm 单点称重传感器(ZEMIC L6D-C3-3kg 或兼容),量程 2–3 kg - 稳定显示 0.1 g;探索 0.01 g 显示/低量程模式 - TMP102 测传感器附近温度做漂移分析;LIS2DW12 做水平/振动/敲击检测 - 第二称重通道:NAU7802 ch2 (VIN2) 经 J11 外接第二传感器/PT1000, 咖啡秤形态可不贴,机器形态接流量或第二称重 - J10 扩展口:8× GPIO(100R 串阻)+ 2× 直连 GPIO + 电源/总线排, 对接机器电源/驱动板;R32 10k 下拉保证 XIO15(HEATER_EN 语义) 默认安全态——裸板/未插扩展时加热线永不会被置位
Main components on the Backup pre fix16
Backup pre fix16 bill of materials (BOM)
78 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NAU7802SGI | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LIS2DW12 | LGA-12_2x2mm_P0.5mm_LIS2DW12 | U2 |
| 1 | TMP102 | SOT-563_1.6x1.6mm_P0.5mm | U3 |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U4 |
| 1 | TP4057-42 | SOT-23-6 | U5 |
| 1 | XC6220B331MR-G | SOT-23-5 | U6 |
| 1 | HT7533-1 | SOT-89-3 | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 2N7002 | SOT-23 | Q2 |
| 1 | LOADCELL | PinHeader_1x05_P2.54mm_H | J2 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | BAT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | LCD | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J7 |
| 1 | BTN | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | EXP | PinHeader_2x10_P2.54mm_Vertical | J10 |
| 1 | CH2 | PinHeader_1x04_P2.54mm | J11 |
| 1 | MLT-8530 | MagneticBuzzer_CUI_CMT-8540S-SMT | BZ1 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | 1N4148W | D_SOD-123 | D2 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 100N 100n | SMD_0805 | C1, C2, C7, C17, C18, C19, C26 |
| 2 | 1u | SMD_0805 | C3, C25 |
| 3 | 100N 100n | SMD_0805_VR | C4, C5, C27 |
| 1 | 100N 100n | SMD_0805_V | C6 |
| 1 | 4U7 4u7 | SMD_0805 | C8 |
| 7 | 10U 10u | SMD_0805 | C9, C13, C15, C16, C20, C21, C22 |
| 2 | 1n | SMD_0805_F | C10, C11 |
| 1 | 100N 100n | SMD_0805_F | C12 |
| 1 | 1u | SMD_0805_V | C14 |
| 2 | 1n | SMD_0805 | C28, C29 |
| 2 | 1k | SMD_0805_VR | R1, R2 |
| 2 | 4K7 4k7 | SMD_0805 | R3, R4 |
| 7 | 10K 10k | SMD_0805 | R5, R6, R11, R15, R16, R21, R32 |
| 2 | 5K1 5k1 | SMD_0805_VR | R8, R9 |
| 1 | 2K7 2k7 | SMD_0805 | R10 |
| 4 | 100K 100k | SMD_0805 | R12, R13, R14, R18 |
| 3 | 1k | SMD_0805 | R17, R22, R23 |
| 2 | 22R | SMD_0805_F | R19, R20 |
| 8 | 100R | SMD_0805_V | R24, R25, R26, R27, R28, R29, R30, R31 |
Backup pre fix16 design files
The KiCad project lives in the puji4810/coffe-scale repository on GitHub; these links point at the commit this page was built from.
Backup pre fix16: common questions
What microcontroller does the Backup pre fix16 use?
The Backup pre fix16 is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the Backup pre fix16 PCB?
The Backup pre fix16 measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Backup pre fix16?
78 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Backup pre fix16 design files?
From the puji4810/coffe-scale repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Backup pre fix16 design in my own project?
Yes, under the terms of its Apache-2.0 license, which puji4810 chose for the repository.
Can I test firmware for the Backup pre fix16 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in coffe-scale
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k