S3.1-before repack
puji4810·coffe-scale·pcb/s3.1/s3.1-before-repack.kicad_pcb
About the S3.1-before repack PCB
S3.1-before repack is an open source ESP32 PCB design by puji4810, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 90 × 55 mm, with 78 components from 39 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the NAU7802SGI, LIS2DW12, TMP102, TP4057-42 and XC6220B331MR-G. By type, the board carries 31 resistors, 27 capacitors, 8 ICs, 7 connectors, 2 transistors and 2 diodes.
It belongs with the usb & debug tools designs in this gallery.
From the project
1. 独立咖啡秤——沿用 scale-adc-s3 的全部功能:称重前端、SPI LCD、 双按键、蜂鸣器、USB-C 供电 / 单节锂电充放电、温度与倾斜传感。 2. 自动手冲机控制器——同一块板通过 J10 扩展口驱动独立的 电源/电机板(水泵、加热、流量/温度传感、喷嘴运动)。高压与功率 驱动电路留在功率板上,本板只做控制。
1. 独立咖啡秤——沿用 scale-adc-s3 的全部功能:称重前端、SPI LCD、 双按键、蜂鸣器、USB-C 供电 / 单节锂电充放电、温度与倾斜传感。 2. 自动手冲机控制器——同一块板通过 J10 扩展口驱动独立的 电源/电机板(水泵、加热、流量/温度传感、喷嘴运动)。高压与功率 驱动电路留在功率板上,本板只做控制。
- 130×30×22 mm 单点称重传感器(ZEMIC L6D-C3-3kg 或兼容),量程 2–3 kg - 稳定显示 0.1 g;探索 0.01 g 显示/低量程模式 - TMP102 测传感器附近温度做漂移分析;LIS2DW12 做水平/振动/敲击检测 - 第二称重通道:NAU7802 ch2 (VIN2) 经 J11 外接第二传感器/PT1000, 咖啡秤形态可不贴,机器形态接流量或第二称重 - J10 扩展口:8× GPIO(100R 串阻)+ 2× 直连 GPIO + 电源/总线排, 对接机器电源/驱动板;R32 10k 下拉保证 XIO15(HEATER_EN 语义) 默认安全态——裸板/未插扩展时加热线永不会被置位
Main components on the S3.1-before repack
S3.1-before repack bill of materials (BOM)
78 components, 39 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NAU7802SGI | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | LIS2DW12 | LGA-12_2x2mm_P0.5mm_LIS2DW12 | U2 |
| 1 | TMP102 | SOT-563_1.6x1.6mm_P0.5mm | U3 |
| 1 | ESP32-S3-WROOM-1-N16R8 | ESP32-S3-WROOM-1 | U4 |
| 1 | TP4057-42 | SOT-23-6 | U5 |
| 1 | XC6220B331MR-G | SOT-23-5 | U6 |
| 1 | HT7533-1 | SOT-89-3 | U7 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U8 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | 2N7002 | SOT-23 | Q2 |
| 1 | LOADCELL | PinHeader_1x05_P2.54mm_H | J2 |
| 1 | TYPE-C-31-M-12 | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J5 |
| 1 | BAT | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J6 |
| 1 | LCD | JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical | J7 |
| 1 | BTN | JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J8 |
| 1 | EXP | PinHeader_2x10_P2.54mm_Vertical | J10 |
| 1 | CH2 | PinHeader_1x04_P2.54mm | J11 |
| 1 | MLT-8530 | MagneticBuzzer_CUI_CMT-8540S-SMT | BZ1 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | 1N4148W | D_SOD-123 | D2 |
Show 19 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 100N 100n | SMD_0805 | C1, C2, C7, C17, C18, C19, C26 |
| 2 | 1u | SMD_0805 | C3, C25 |
| 3 | 100N 100n | SMD_0805_VR | C4, C5, C27 |
| 1 | 100N 100n | SMD_0805_V | C6 |
| 1 | 4U7 4u7 | SMD_0805 | C8 |
| 7 | 10U 10u | SMD_0805 | C9, C13, C15, C16, C20, C21, C22 |
| 2 | 1n | SMD_0805_F | C10, C11 |
| 1 | 100N 100n | SMD_0805_F | C12 |
| 1 | 1u | SMD_0805_V | C14 |
| 2 | 1n | SMD_0805 | C28, C29 |
| 2 | 1k | SMD_0805_VR | R1, R2 |
| 2 | 4K7 4k7 | SMD_0805 | R3, R4 |
| 7 | 10K 10k | SMD_0805 | R5, R6, R11, R15, R16, R21, R32 |
| 2 | 5K1 5k1 | SMD_0805_VR | R8, R9 |
| 1 | 2K7 2k7 | SMD_0805 | R10 |
| 4 | 100K 100k | SMD_0805 | R12, R13, R14, R18 |
| 3 | 1k | SMD_0805 | R17, R22, R23 |
| 2 | 22R | SMD_0805_F | R19, R20 |
| 8 | 100R | SMD_0805_V | R24, R25, R26, R27, R28, R29, R30, R31 |
S3.1-before repack design files
The KiCad project lives in the puji4810/coffe-scale repository on GitHub; these links point at the commit this page was built from.
S3.1-before repack: common questions
What microcontroller does the S3.1-before repack use?
The S3.1-before repack is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.
How big is the S3.1-before repack PCB?
The S3.1-before repack measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the S3.1-before repack?
78 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the S3.1-before repack design files?
From the puji4810/coffe-scale repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the S3.1-before repack design in my own project?
Yes, under the terms of its Apache-2.0 license, which puji4810 chose for the repository.
Can I test firmware for the S3.1-before repack without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in coffe-scale
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k