HardLabs

X17-pi cm hat - -

purduerov·X17-pi_cm_hat_-_-

X17-pi cm hat - - layout, top view — open source Raspberry Pi board by purduerov

About the X17-pi cm hat - -

X17-pi cm hat - - is an open source Raspberry Pi PCB design by purduerov, published on GitHub. It is a 4-layer board measuring 9.3 × 6.9 mm, with 177 components from 66 distinct parts.

Its main chip is the ComputeModule4, from the Raspberry Pi family. Other key parts include the TPD4EUSB30, MagJack-A70-112-331N126, LP2985A-50DBVR, 74LVC1G07SE-7 and ISOW1432BDFMR. By type, the board carries 49 resistors, 38 connectors, 29 capacitors, 20 ICs, 16 diodes and 8 jumpers.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Raspberry pi compute module 4 R&D board.

Main components on the X17-pi cm hat - -

TPD4EUSB30MagJack-A70-112-331N126LP2985A-50DBVR74LVC1G07SE-7ISOW1432BDFMRBNO085MAX485CSA_TFE1.1s24LC02B-I_SNTPS2117DRLRINA260AIPWBME280RT9742GGJ5AZ1117IH-3.3TRG1PCA9685PW,118RT9742SNGV

X17-pi cm hat - - bill of materials (BOM)

177 components, 66 distinct parts.

QtyPartRefs
2
TPD4EUSB30
U1, U2
1
MagJack-A70-112-331N126
U3
1
LP2985A-50DBVR
U4
2
74LVC1G07SE-7
U5, U9
1
ISOW1432BDFMR
U6
2
BNO085
U7, U16
1
MAX485CSA_T
U8
1
FE1.1s
U10
1
24LC02B-I_SN
U11
1
TPS2117DRLR
U12
1
INA260AIPW
U14
2
BME280
U15, U17
1
RT9742GGJ5
U18
1
AZ1117IH-3.3TRG1
U20
1
PCA9685PW,118
PCA9685PW_118
U22
1
RT9742SNGV
U25
1
2N7002
Q2
1
ABLS-12.000MHZ-B2-T
Y3
2
Conn_01x03
J1, J3
1
Conn_02x07_Odd_Even
J2
Show 46 more
QtyPartRefs
4
482040001
J4, J5, J6, J10
1
Micro_SD_Card_Det
J7
3
BM04B-GHS-TBT
J8, J29, J31
2
THD-02-R
J9, J12
2
430450212
J11, J22
5
Conn_01x02
J13, J21, J24, J30, J32
2
DF11-10DP-2DSA24
J14, J20
1
430450612
J15
4
SM02B-GHS-TB
J16, J17, J18, J19
1
UJC-HP-L-G-5-MSMT-TR
J23
6
Conn_01x01
J25, J34, J37, J38, J40, J42
1
690-019-298-412
J26
2
DF13-4P-1.25DSA25
J27, J28
1
B3B-XH-A
J33
8
Jumper_2_Open
JP1, JP2, JP3, JP4, JP7, JP8, JP9, JP10
1
ComputeModule4
Module1
1
1301.9314.24
SW1
8
TestPoint
TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9
1
LED Red
D1
1
LED Green
D2
13
LED
D3, D4, D5, D6, D7, D8, D9, D10 +5
1
D
D18
5
FerriteBead
FB1, FB2, FB3, FB4, FB6
3
100n
C1, C80, C81
11
.1u
C2, C6, C7, C9, C13, C14, C15, C16 +3
5
10u
C3, C5, C19, C24, C27
1
22u
C4
1
0.1u
C8
3
10n
C10, C20, C25
2
1u
C11, C26
1
150u
C12
2
18p
C22, C23
14
1k
R1, R7, R9, R10, R11, R12, R13, R14 +6
2
470R
R2, R3
3
nf
R4, R17, R18
1
0R
R5
1
2.7k
R6
9
10k
R8, R28, R30, R31, R32, R39, R44, R45 +1
2
5.1k
R15, R16
4
2.2k
R20, R27, R36, R47
2
2.2K 1%
R21, R22
7
240
R24, R37, R38, R40, R41, R42, R43
1
27k
R26
1
12K 1%
R29
1
5k
R46
1
120
R49

X17-pi cm hat - - design files

The KiCad project lives in the purduerov/X17-pi_cm_hat_-_- repository on GitHub; these links point at the commit this page was built from.

X17-pi cm hat - -: common questions

What microcontroller does the X17-pi cm hat - - use?

The X17-pi cm hat - - is built around the ComputeModule4, from the Raspberry Pi family.

How big is the X17-pi cm hat - -?

The X17-pi cm hat - - measures 9.3 × 6.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the X17-pi cm hat - -?

177 components, from 66 distinct parts. The full bill of materials is listed on this page.

Where can I download the X17-pi cm hat - - design files?

From the purduerov/X17-pi_cm_hat_-_- repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the X17-pi cm hat - - design in my own project?

The repository has no license, so all rights stay with purduerov. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the X17-pi cm hat - - without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards