10 open source boards using the PCA9685PW,118

Real designs built with the PCA9685PW,118, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

10 boardsClear filters|Most starred

How designs wire the PCA9685PW,118

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the PCA9685PW,118 connects to, and the resistors, capacitors and other passives placed on it.

  • The A1 pin is tied to GND on 8 of 9 designs.
  • The A3 pin is tied to GND on 8 of 9 designs.
  • The A5 pin is tied to GND on 8 of 9 designs.
  • The SCL pin has a pull-up to 5V on 6 of 9 designs, most often 4.7 kΩ (then 10 kΩ).
A0pin 1Connected to: GND 67% · a signal 22%
A1pin 2Connected to: GND 89%
A2pin 3Connected to: GND 78%
A3pin 4Connected to: GND 89%
A4pin 5Connected to: GND 78%
LED0pin 6Connected to: A connector 44%
  • Series resistor on 33% · 330 Ω (1), 1 kΩ (1), 220 Ω (1)
LED1pin 7Connected to: A connector 44%
  • Series resistor on 33% · 330 Ω (1), 1 kΩ (1), 220 Ω (1)
VSSpin 14Connected to: GND 100%
OEpin 23Connected to: Signal 67% · GND 33%
  • Resistor to GND on 33% · 10 kΩ (2), 250 kΩ (1)
A5pin 24Connected to: GND 89%
EXTCLKpin 25Connected to: GND 78% · not connected 22%
SCLpin 26Connected to: A connector 44%, the microcontroller 22%
  • Pull-up to 5V on 67% · 4.7 kΩ (3), 10 kΩ (2), 2.2 kΩ (1)
SDApin 27Connected to: A connector 44%, the microcontroller 22%
  • Pull-up to 5V on 67% · 4.7 kΩ (3), 10 kΩ (2), 2.2 kΩ (1)
VDDpin 28Connected to: 3.3V 89%
  • Decoupling capacitor on 44% · 10 µF (3), 100 nF (2)

14 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Echo state module by etrautmann, Ecu hw by KPI-Rover, Mad Bot by Incomprehensible and Kicad pcb ioexpander by fanningert.

The PCA9685PW,118 in open source designs

The gallery holds 10 open source boards using the PCA9685PW,118 from 10 GitHub repositories; a typical one measures about 100 × 75 mm and carries around 100 components.

78% use four copper layers or more, and 30% carry an open source license.

The most starred is Echo state module by etrautmann.

Parts used alongside the PCA9685PW,118

Microcontrollers on boards using the PCA9685PW,118

PCA9685PW,118: common questions

Where can I find a PCA9685PW,118 reference design?

Each of the 10 boards on this page is a real design using the PCA9685PW,118. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCA9685PW,118 A1 pin connected?

The A1 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the PCA9685PW,118.

How is the PCA9685PW,118 A3 pin connected?

The A3 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the PCA9685PW,118.

How is the PCA9685PW,118 A5 pin connected?

The A5 pin is tied to GND on 8 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the PCA9685PW,118.

What parts are used alongside the PCA9685PW,118?

The MPU-6050, RT9742GGJ5 and USBLC6-2SC6 appear in the most repositories here.

Which microcontrollers do boards using the PCA9685PW,118 use?

Most are built on Raspberry Pi (2), AVR/Arduino (1), ESP32 (1) and STM32 (1).

How big is a typical board using the PCA9685PW,118?

The median is 100 × 75 mm, and 22% are two-layer designs.

What is the most popular open source board using the PCA9685PW,118?

By GitHub stars, Echo state module by etrautmann, with 2 stars.

Can I simulate one of these boards using the PCA9685PW,118 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part