Thehulk

RetroLoft·thehulk·hardware/prod-v3/thehulk.kicad_pcb

Thehulk PCB layout, top view — open source ESP32 board by RetroLoft

About the Thehulk PCB

Thehulk is an open source ESP32 PCB design by RetroLoft, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 84.1 × 42 mm, with 78 components from 36 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R8, from the ESP32 family. Other key parts include the SGM2212-3.3XKC3G, ICE40UP5K-SG48ITR, TLV75512PDBV, TLV75533PDBV and 74LVC1G08. By type, the board carries 37 capacitors, 17 resistors, 12 ICs, 6 diodes, 3 switches and 1 connector.

It belongs with the retro computing and iot & wireless designs in this gallery.

From the project

Network and SD card storage cartridge for the Atari ST, STE, Mega ST(E), TT and Falcon (ESP32-S3 + iCE40 FPGA)

Network and SD card storage cartridge for the Atari ST, STE, Mega ST(E), TT and Falcon, built around an ESP32-S3 and a Lattice iCE40UP5K FPGA. Successor of SideTNFS.

Requirements: - FPGA: yosys, nextpnr-ice40 and icepack. build.sh installs the YoWASP builds from PyPI in .venv-fpga when no native tools are found. - GEMDRIVE: stcmd from atarist-toolkit-docker (Docker image logronoide/atarist-toolkit-docker). - Configuration program: m68k-atari-mint-gcc with gemlib. STinG driver and installer: m68k-atari-mint-gcc. - ESP32: ESP-IDF 5.5 in ~/esp/esp-idf (or set IDFPATH`).

Main components on the Thehulk

Thehulk bill of materials (BOM)

78 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SGM2212-3.3XKC3G
SGM2212-3.3XKC3G/TR
U1
1
ICE40UP5K-SG48ITR
U2
1
TLV75512PDBV
U3
1
TLV75533PDBV
U4
1
74LVC1G08
U5
1
ESP32-S3-WROOM-1-N16R8
U6
1
LM66100DCK
U7
2
SN74LVC16T245DGGR
U8, U9
1
74LVC2T45DC
U10
1
SN74AHCT1G125DBVR
U12
1
TPS2051CDBV
U13
1
Jing Extension 920-E52A2021S10100
USB_B_Micro
J3
1
Buzzer
BZ1
1
TF-01A
韩国韩荣
Card1
1
Kinghelm KH-6X6X9.5H-SMT (9.5 mm)
SW_Push
SW1
2
SW_Push
SW5, SW6
1
1N5819HW-7-F
D1
3
LESD5D5.0CT1G
D2, D3, D4
1
WS2812B-2020
D5
1
WS2812D-F5
D6
Show 16 more
QtyPartRefs
20
100NF
100nF
C1, C2, C3, C4, C5, C8, C12, C13 +12
6
10UF
10uF
C6, C25, C27, C30, C31, C41
1
1UF
1uF
C7
1
47UF
47uF
C11
5
4.7UF
4.7uF
C14, C15, C16, C17, C19
1
1UF
1uF
C26
3
100N
100n
C28, C29, C32
5
4K7
R1, R5, R6, R7, R9
2
10K
R2, R10
1
220R
R4
1
100R
R8
1
20K
R11
2
22R
R12, R13
3
10K
R14, R15, R23
1
C17477
0R
R16
1
100K
R24

Thehulk design files

The KiCad project lives in the RetroLoft/thehulk repository on GitHub; these links point at the commit this page was built from.

Thehulk: common questions

What microcontroller does the Thehulk use?

The Thehulk is built around the ESP32-S3-WROOM-1-N16R8, from the ESP32 family.

How big is the Thehulk PCB?

The Thehulk measures 84.1 × 42 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Thehulk?

78 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Thehulk design files?

From the RetroLoft/thehulk repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Thehulk design in my own project?

Yes, under the terms of its GPL-3.0 license, which RetroLoft chose for the repository.

Can I test firmware for the Thehulk without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards