LIONv3-Mini

RodrigoCAndrade·LIONv3-Mini·hardware/LIONv3/LIONv3.kicad_pcb

LIONv3-Mini PCB layout, top view — open source ESP32 board by RodrigoCAndrade

About the LIONv3-Mini PCB

LIONv3-Mini is an open source ESP32 PCB design by RodrigoCAndrade, published on GitHub. It is a 4-layer board measuring 50.2 × 40.2 mm, with 78 components from 36 distinct parts.

Its main chip is the ESP32-C6-MINI-1-N4, from the ESP32 family. Other key parts include the TMP112AIDRLR, USBLC6-2SC6, TYPE-C_16PIN_2MD(073), INA226AIDGSR and E80-900M2213S. By type, the board carries 29 resistors, 20 capacitors, 11 ICs, 9 diodes, 5 connectors and 2 switches.

It belongs with the iot & wireless and rf & radio designs in this gallery.

From the project

The LIONv3-Mini is an IoT and Direct-to-Satellite board powered by the ESP32-C6, combining local Wi-Fi, Zigbee, and Thread networks with high-density LR-FHSS connectivity for scalable global tracking and telemetry.

The LIONv3-Mini is a miniaturized version of the LIONv3-R, without an onboard LoRa PCB antenna. Built around the ESP32-C6 with 16 MB of external flash, it offers local connectivity over Wi-Fi, Zigbee and Thread, plus LoRa and LR-FHSS for reliable Direct-to-Satellite (DtS) or terrestrial uplinks from remote sites at higher device densities than conventional LoRa. It is a scalable platform for telemetry, global asset tracking and remote sensing.

LIONv3-Mini, from the project README
From the project README

Main components on the LIONv3-Mini

LIONv3-Mini bill of materials (BOM)

78 components, 36 distinct parts.

QtyPartRefs
1
ESP32-C6-MINI-1-N4
U3
1
TMP112AIDRLR
U6
1
USBLC6-2SC6
U7
1
TYPE-C_16PIN_2MD(073)
U8
2
INA226AIDGSR
U9, U17
1
E80-900M2213S
U10
1
W25Q16JVSSIQTR
U11
1
TPS259474ARPWR
U14
1
TLV76733DRVR
U15
1
TCAN3414DR
U21
5
532610271
J1, J2, J3, J4, J5
2
~
SW1, SW2
2
ESD9B3.3ST5G
D1, D2
3
PMEG2010ER
D3, D4, D5
1
TI ESD752DBZR
D6
3
LED
D7, D8, D9
2
BLM21PG221SN1D
FB1, FB2
4
22uF
C1, C9, C15, C16
9
100nF
C2, C4, C7, C8, C10, C11, C12, C19 +1
3
1uF
C3, C13, C14
Show 16 more
QtyPartRefs
1
3.3nF
C17
1
2.2nF
C18
1
10uF
C20
1
4.7nF
C22
11
10k
R1, R4, R5, R11, R13, R14, R15, R16 +3
3
4.7k
R2, R3, R7
2
0
R6, R8
2
5.1k
R9, R10
2
50m
R12, R26
2
120
R17, R20
1
60.4k
R18
1
15k
R19
1
34.8k
R23
1
430
R24
1
3.32k
R25
2
59
R28, R29

LIONv3-Mini design files

The KiCad project lives in the RodrigoCAndrade/LIONv3-Mini repository on GitHub; these links point at the commit this page was built from.

LIONv3-Mini: common questions

What microcontroller does the LIONv3-Mini use?

The LIONv3-Mini is built around the ESP32-C6-MINI-1-N4, from the ESP32 family.

How big is the LIONv3-Mini PCB?

The LIONv3-Mini measures 50.2 × 40.2 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the LIONv3-Mini?

78 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the LIONv3-Mini design files?

From the RodrigoCAndrade/LIONv3-Mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the LIONv3-Mini design in my own project?

The repository has no license, so all rights stay with RodrigoCAndrade. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the LIONv3-Mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards