4 open source boards using the TYPE-C_16PIN_2MD(073)
Real designs built with the TYPE-C_16PIN_2MD(073), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
LIONv3-R
RodrigoCAndrade
50.2 × 85.2 mm79 parts4LNo license4ESP32
LIONv3-Mini
RodrigoCAndrade
50.2 × 40.2 mm78 parts4LNo license2ESP32
MecProInverter
Eg0st
104 × 168 mm172 parts4LNo license0Power base
anuejn
29.4 × 29.4 mm27 parts2LNo license38
The TYPE-C_16PIN_2MD(073) in open source designs
The gallery holds 4 open source boards using the TYPE-C_16PIN_2MD(073) from 4 GitHub repositories; a typical one measures about 50.2 × 62.7 mm and carries around 79 components.
75% use four copper layers or more, and 0% carry an open source license.
The most starred is Power base by anuejn.
Parts used alongside the TYPE-C_16PIN_2MD(073)
Microcontrollers on boards using the TYPE-C_16PIN_2MD(073)
What boards using the TYPE-C_16PIN_2MD(073) are built for
TYPE-C_16PIN_2MD(073): common questions
Where can I find a TYPE-C_16PIN_2MD(073) reference design?
Each of the 4 boards on this page is a real design using the TYPE-C_16PIN_2MD(073). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the TYPE-C_16PIN_2MD(073)?
The E80-900M2213S, ESP32-C6-MINI-1-N4, INA226AIDGSR, TCAN3414DR and TLV76733DRVR appear in the most repositories here.
Which microcontrollers do boards using the TYPE-C_16PIN_2MD(073) use?
Most are built on ESP32 (3).
How big is a typical board using the TYPE-C_16PIN_2MD(073)?
The median is 50.2 × 62.7 mm, and 25% are two-layer designs.
What is the most popular open source board using the TYPE-C_16PIN_2MD(073)?
By GitHub stars, Power base by anuejn, with 38 stars.
Can I simulate one of these boards using the TYPE-C_16PIN_2MD(073) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.