10 open source boards using the TPS259474ARPWR
Real designs built with the TPS259474ARPWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Open Shot Clock Display
DLaxV-Community-Projects-Hub
100 × 75 mm196 parts2LCERN-OHL-P-2.05ESP32
Parsnip
LimesKey
60 × 130 mm400 parts4LCC-BY-NC-4.04ESP32
LIONv3-R
RodrigoCAndrade
50.2 × 85.2 mm79 parts4LNo license4ESP32
LIONv3-Mini
RodrigoCAndrade
50.2 × 40.2 mm78 parts4LNo license2ESP32
Assembly preview
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00ESP32
Pajoniiir-M1
dvucinozd
175.6 × 220.1 mm223 parts4LNo license0ESP32
Repulsive Maglev
fe871bae
280 × 145 mm103 parts4LNo license0ESP32
Carrier
ripclap
110 × 96 mm423 parts6LCERN-OHL-P-2.00Jetson Orin Baseboard
AtlasAutoware
120 × 90 mm312 parts8LNo license0PIC
Rocket power board
waterloo-rocketry
33 × 58.4 mm79 parts4LGPL-3.015
How designs wire the TPS259474ARPWR
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the TPS259474ARPWR connects to, and the resistors, capacitors and other passives placed on it.
- The DVDT_7 pin has a capacitor to GND on 9 of 9 designs, most often 2.2 nF (then 100 pF).
- The ILM_9 pin has a resistor to GND on 8 of 9 designs, most often 3.32 kΩ (then 680 Ω).
- The ITIMER_10 pin has a capacitor to GND on 8 of 9 designs, most often 2.2 nF (then 3.3 nF).
- The OVLO pin has a resistor to GND on 7 of 9 designs, most often 34.8 kΩ (then 50 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| EN/UVLO_1pin 1 | Connected to: Signal 89% |
|
| OVLOpin 2 | Connected to: Signal 78% · GND 22% |
|
| PGpin 3 | Connected to: Signal 67% · not connected 22% |
|
| PGTHpin 4 | Connected to: Signal 78% |
|
| IN_5pin 5 | Connected to: 5V 67% · a signal 33% | — |
| OUT_6pin 6 | Connected to: 5V 89% | — |
| DVDT_7pin 7 | Connected to: Signal 100% |
|
| GND_8pin 8 | Connected to: GND 100% | — |
| ILM_9pin 9 | Connected to: Signal 89% |
|
| ITIMER_10pin 10 | Connected to: Signal 89% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Rocket power board by waterloo-rocketry, Open Shot Clock Display by DLaxV-Community-Projects-Hub, Parsnip by LimesKey and LIONv3-R by RodrigoCAndrade.
The TPS259474ARPWR in open source designs
The gallery holds 10 open source boards using the TPS259474ARPWR from 9 GitHub repositories; a typical one measures about 105 × 93 mm and carries around 210 components.
90% use four copper layers or more, and 40% carry an open source license.
The most starred is Rocket power board by waterloo-rocketry.
Parts used alongside the TPS259474ARPWR
What boards using the TPS259474ARPWR are built for
TPS259474ARPWR: common questions
Where can I find a TPS259474ARPWR reference design?
Each of the 10 boards on this page is a real design using the TPS259474ARPWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS259474ARPWR DVDT_7 pin connected?
The DVDT_7 pin has a capacitor to GND on 9 of 9 designs, most often 2.2 nF (then 100 pF). Counted from the KiCad layouts of 9 open source designs using the TPS259474ARPWR.
What resistor goes on the TPS259474ARPWR ILM_9 pin?
The ILM_9 pin has a resistor to GND on 8 of 9 designs, most often 3.32 kΩ (then 680 Ω). Counted from the KiCad layouts of 9 open source designs using the TPS259474ARPWR.
How is the TPS259474ARPWR ITIMER_10 pin connected?
The ITIMER_10 pin has a capacitor to GND on 8 of 9 designs, most often 2.2 nF (then 3.3 nF). Counted from the KiCad layouts of 9 open source designs using the TPS259474ARPWR.
What parts are used alongside the TPS259474ARPWR?
The E80-900M2213S, ESP32-C6-MINI-1-N4, INA226AIDGSR, TCAN3414DR and TLV76733DRVR appear in the most repositories here.
Which microcontrollers do boards using the TPS259474ARPWR use?
Most are built on ESP32 (8) and PIC (1).
How big is a typical board using the TPS259474ARPWR?
The median is 105 × 93 mm, and 10% are two-layer designs.
What is the most popular open source board using the TPS259474ARPWR?
By GitHub stars, Rocket power board by waterloo-rocketry, with 15 stars.
Can I simulate one of these boards using the TPS259474ARPWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.