RetroCom
SamyIOoOI·RetroCom·KiCad_PCB_Source/RetroCom.kicad_pcb
About the RetroCom PCB
RetroCom is an open source PCB design by SamyIOoOI, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 190 × 111 mm, with 84 components from 53 distinct parts.
Other key parts include the AT89C55WD-24PU, 757, LM386, CD4051B and MAX485E. By type, the board carries 22 capacitors, 22 resistors, 14 ICs, 7 switches, 5 connectors and 4 diodes.
It belongs with the retro computing designs in this gallery.
From the project
A 4-Station one-to-one two-way INTERCOM built around the AT89C52-PI24 RetroMCU (8051 Core).
- AT89C52-PI24 MCU per Station. [Handles Interstation Communication & Interface]. - Supports two-way simultaneous speech. No taking turns when talking. RetroCom functions just like a phonecall. - All stations are connected to main station directly via CAT6 Cables. Distances of 20M (Meters) to 30M are OK . - Switching is done by CD4051 & CD4052 ICs powered with negative & postive 5 V Rails. PreAmped Signals face no distortion. - Audio undergoes a preamp stage under the TL072 & power amp stage under the LM386. - The main station has a built in Radio Module. [As of Version 1.0 [WIRED] the radio…

Main components on the RetroCom
RetroCom bill of materials (BOM)
84 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AT89C55WD-24PU | DIP-40_W15.24mm_Socket | U1 |
| 1 | 757 | MODULE_757 | U2 |
| 1 | LM386 | DIP-8_W7.62mm_Socket | U3 |
| 1 | CD4051B | DIP-16_W7.62mm_Socket | U4 |
| 3 | MAX485E | DIP-8_W7.62mm_Socket | U5, U6, U11 |
| 1 | ICL7660 | DIP-8_W7.62mm_Socket | U8 |
| 1 | ~ | PinHeader_1x04_P2.54mm_Vertical | U9 |
| 1 | CD4052B | DIP-16_W7.62mm_Socket | U10 |
| 1 | uA7805 | TO-220-3_Horizontal_TabUp | U12 |
| 1 | TL072 | DIP-8_W7.62mm_Socket | U18 |
| 1 | ~ | MSOP-10_3x3mm_P0.5mm | U29 |
| 1 | uA7833 | TO-220-3_Horizontal_TabUp | U31 |
| 3 | S8050 | TO-92_Inline | Q1, Q2, Q3 |
| 1 | 11.0592MHz | Crystal_HC49-U_Vertical | Y1 |
| 1 | 32.768 kHz | Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y2 |
| 1 | Antenna | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1 |
| 1 | Station 2 Cable [Ethernet] | RJ45_Amphenol_RJHSE5380 | J2 |
| 1 | Station 3 Cable [Ethernet] | RJ45_Amphenol_RJHSE5380 | J3 |
| 1 | Station 4 Cable [Ethernet] | RJ45_Amphenol_RJHSE5380 | J4 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J5 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Mic Volume Control | PinHeader_1x02_P1.00mm_Horizontal | 10K1 |
| 1 | Buzzer | PinHeader_1x02_P1.00mm_Horizontal | BZ1 |
| 1 | Station 1 Speaker | PinHeader_1x02_P2.54mm_Vertical | LS1 |
| 1 | Microphone | PinHeader_1x02_P2.54mm_Vertical | MK2 |
| 1 | Volume Control Station 1 | PinHeader_1x03_P2.54mm_Vertical | RV6 |
| 1 | Call Button | PinHeader_1x02_P2.54mm_Vertical | SW1 |
| 1 | Hang Button | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | Scroll Button | PinHeader_1x02_P2.54mm_Vertical | SW3 |
| 1 | Radio Button | PinHeader_1x02_P2.54mm_Vertical | SW4 |
| 1 | Speaker Switch | PinHeader_1x04_P2.54mm_Vertical | SW17 |
| 1 | Radio Button 2 | PinHeader_1x02_P2.54mm_Vertical | SW21 |
| 1 | POWER_SWITCH | PinHeader_1x02_P2.54mm_Vertical | SW22 |
| 1 | Yellow Hold LED | PinHeader_1x02_P2.54mm_Vertical | D1 |
| 1 | Green Call LED | PinHeader_1x02_P2.54mm_Vertical | D2 |
| 1 | Red Power LED | PinHeader_1x02_P2.54mm_Vertical | D3 |
| 1 | Orange Speaker Switch LED | PinHeader_1x02_P2.54mm_Vertical | D14 |
| 2 | 33pF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2 |
| 8 | 0.1 uF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C3, C4, C5, C12, C14, C26, C28, C41 |
| 3 | 10 uF | CP_Radial_D5.0mm_P2.50mm | C6, C23, C24 |
| 1 | 220 uF | CP_Radial_D6.3mm_P2.50mm | C11 |
| 1 | 4700 uF | CP_Radial_D16.0mm_P7.50mm | C27 |
| 4 | 47 uF | CP_Radial_D6.3mm_P2.50mm | C42, C45, C46, C70 |
| 2 | 100 nF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C43, C44 |
| 1 | 100pF | C_Disc_D3.8mm_W2.6mm_P2.50mm | C69 |
| 9 | 10K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R6, R7, R8, R10, R11, R22 +1 |
| 3 | 4.7K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R9, R12 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | 2.2K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 4 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R18, R19, R26, R50 |
| 1 | 47k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R20 |
| 1 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R21 |
| 1 | 47 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R24 |
| 1 | 220K | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R25 |
RetroCom design files
The KiCad project lives in the SamyIOoOI/RetroCom repository on GitHub; these links point at the commit this page was built from.
RetroCom: common questions
How big is the RetroCom PCB?
The RetroCom measures 190 × 111 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RetroCom?
84 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RetroCom design files?
From the SamyIOoOI/RetroCom repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RetroCom design in my own project?
Yes, under the terms of its GPL-3.0 license, which SamyIOoOI chose for the repository.
More boards in RetroCom
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k